User Manual - Page 295

For 2009 OUTBACK 2.5I.

Loading ...
Loading ...
Loading ...
Black plate (303,1)
Model "A2450BE-A" EDITED: 2008/ 3/ 24
! To decrease the speed (by brake
pedal)
1. Depress the brake pedal to release
cruise control temporarily.
2. When the speed decreases to the
desired speed, press the SET/COAST
button once. Now the desired speed is set
and the vehicle will keep running at that
speed without depressing the accelerator
pedal.
& Cruise control indicator light
Vehicle with SI-DRIVE
Vehicle without SI-DRIVE
The cruise control indicator light illumi-
nates when the ignition switch is turned to
the ON position and goes out after
approximately 3 seconds.
The light illuminates when the CRUISE
main switch is pressed.
NOTE
. If y ou press the CRUISE main
switch button while turning the ignition
switch ON, the cruise control func-
tion is deactivated and the cruise
control indicator light flashes. To re-
activate the cruise control function,
turn the ignition switch back to the
Acc or LOCK position, and then
turn it again to the ON position.
. If this indicator light and the CHECK
ENGINE warning light/malfunction in-
dicator lamp flash simultaneously dur-
ing driving, have the vehicle checked
by your nearest SUBARU dealer.
Starting and operating 7-49
CONTINUED
7
Loading ...
Loading ...
Loading ...