Loading ...
Loading ...
Loading ...
84 GETTING TO KNOW YOUR VEHICLE
TRI-FOLD TONNEAU COVER REMOVAL
To remove the Tonneau Cover, use the following
steps:
1. Open the tailgate to gain access to the rear
pair of Tonneau Cover clamps located on the
underside of the cover.
Location Of Rear Clamps
NOTE:
If clamp wire is damaged replace immediately.
2. Pull both clamp handles down to release the
Tonneau Cover’s rear panel.
Released Position
3. From the released position, send the clamps
to the Stowed Position by pushing from the
yellow bumper up.
Stowed Position
4. Fold the rear panel up onto the center panel
(intermediate position).
NOTE:
When folding the center and rear panels,
the sections MUST be held together to avoid
damage to the cover material.
Fold the panels gently. It is not recom-
mended to allow the panels to drop under
their own weight.
Folded Rear Panel (Intermediate Position)
CAUTION!
Make sure the Tonneau Cover clamp and clamp
wire are in the proper stowed position. If the
clamp and clamp wire are not properly stowed,
damage to the Tonneau Cover material will
result.
22_DS_OM_EN_USC_t.book Page 84
Loading ...
Loading ...
Loading ...