Loading ...
Loading ...
Loading ...
32
C
H
E
C
K
B
E
F
O
R
E
A
S
K
I
N
G
F
O
R
S
E
R
V
I
C
E
▼If there is a problem with your cooker, check the following details before requesting service to your dealer.
Sometimes the cooker may not operate as desired if used incorrectly.
Case
Rice is too watery or stiff.
Check points
•
Is the menu selected correctly?
•
Did you properly measure water?
•
Did you open the top cover before
cooking was finished?
Do the following
Bean (other grains)is half
cooked.
•
Is bean (other grains) too dry?
•
Soak or steam beans and other grains before
cooking in the pressure cooker in order to avoid
partially cooked beans or grains. Beans should
be soaked for -2-minutes or steamed for-2-
minutes prior to cooking, depending on your
taste.
•
Select the correct menu.
•
Properly measure water.
•
Open the top cover after cooking finished
When the water overflows.
•
Did you use the measuring cup?
•
Did you use proper amount of water?
•
Is the menu selected correctly?
•
Refer to page
16~17.
When you smell odors while
warming.
If “ ” sign is appears.
•
Did you close the top cover?
•
Please check it the power cord is plugged.
•
Did it warm over 12 hours?
•
Is there any other substance such as rice
scoop or cold rice?
•
Is been (other grains) too dry?
•
Select the correct menu.
•
Properly measure water.
•
Open the top cover after cooking finished
•
It shows on the display when pressing
“Start” button again, or when the cooking
has finished and you've never ever open
turned the handle to “Unlock”
•
It can be solved by turning handle to “Unlock” and
then turn to “Lock”
“ , , ”
Signs show up.
•
Temperature sensor or fan motor does
not work properly.
•
Unplug the power cord and call the Service center.
Warming passed time mark
blinks during keeping warm.
•
24 hours has not passed yet after Keeping
warm
•
This function alarms if the rice remained warm for
more than 24 hours.
Rice has gotten cold or a lot of
water flow during Keeping warm
•
Keeping warm was set in “Sleeping” mode
•
Keep warm after cancelling or setting “Sleep
Keeping Warm” mode depending on the necessity.
“ ” sign shows up
•
Detachable cover is not mounted
•
Mount detachable cover(Refer to page 12)
•
If “ ” sign is displayed continuously even
though you already installed detachable cover,
please contact customer service.
The power is not on after plug in
the power cord,
•
Please turn on the standby power switch button.
•
Detachable cover is not mounted
Alarm sounds or reheating does
not work while keeping warm
•
Mount detachable cover(Refer to page 12).
“
”
Sign shows up
•
Appears when an overpressure occurs.
•
Unplug the power cord and call the Service
center
“”,“”
Sign shows up
•
Pressure sensor does not work properly.
•
Unplug the power cord and call the Service
center
“”,“”,“ ”,
“”,“”,“ ”,
Sign shows up
•
Appears when there is an abnormality
after pressure check.
•
Refer to How to use pressure check and use it
correctly.
Loading ...
Loading ...
Loading ...