Loading ...
Loading ...
Loading ...
15
English
Inserting the milk carafe
If installed, remove the water dispensing spout:
1 Press the two side buttons to unlock the dispensing spout and lift it slightly;
2 Pull the water dispensing spout to remove it.
Note: Do not force the carafe while inserting it.
3 Slightly tilt the milk carafe. Insert it all the way into the guides of the machine.
4 Push the carafe downwards while rotating it at the same time until it locks onto
the drip tray.
Dispensing frothed milk based coee beverages
Tip: use only cold milk (at a temperature of approx. 5°C) and with at least a
3% protein content so as to obtain a perfect milk foam. Either whole milk or semi-
skimmed milk can be used. Skimmed, soy or lactose-free milk can also be used.
1 Pull out the milk dispensing spout to the right up to the icon.
Note: if the milk dispensing spout has not been pulled all the way out,
the milk may not be properly frothed.
2 Place a cup under the open milk dispensing spout.
3 Press the HOMEbutton
HOME
andchoose the desired beverage from the menu.
- Press the button corresponding to the desired beverage.
- Press the START/STOP
START/STOP
button to start dispensing the selected bever-
age.
4 The machine dispenses a default amount of coffee and frothed milk into the
cup or the glass. Depending on the beverage chosen, either coffee or frothed
milk will be dispensed rst.
If you wish to customise the settings of a specic beverage, please refer to the
“Beverage Customisation” section.
Removing the milk carafe
Rotate the carafe upwards until it is naturally released from the insert in the
drip tray. Then, remove the carafe.
4219-465-03691 MAN. GAG.MAGENTA PRESTIGE EN-NL-PL Rev 01.indd 15 21/01/2021 12:41:52
Loading ...
Loading ...
Loading ...