Loading ...
Loading ...
Loading ...
A beep is emitted to confirm each button press. These button sounds can be
switched off. The beeps emitted after the grinding/brewing/warming proces-
ses/descaling warning cannot be disabled.
TIPS
Be aware that using this feature will weaken the flavor strength of the finished
pot, because the flavor profile of coffee brewed at the beginning of the cycle
differs from coffee made at the end.
TIPS
6.6 Button Sound Setting
2423
6. Other Functions 7. Cleaning & Maintenance
Step 1 - Press the STRENGTH CONTROL Button for 2 seconds. You will see
“ ” or “ ” flashing on the display.
Step 2 - Press the STRENGTH CONTROL Button.
: button sounds switched on.
: button sounds switched off.
Wait a few seconds. The most recent option displayed will be applied.
7. Cleaning & Maintenance
The lack of maintenance of the machine would not only affect your coffee taste
but also lower the performance or even shorten the lifespan of your machine.
For you to better maintain your machine, we’ve prepared some helpful tips for
you as follows.
7.1 Before Use
Regarding the Grinding Part
1 - This machine is not suitable for deep-roasted beans. Dark, greasy beans can
leave some greasy residue on the burrs and in the feeder channels.
The oil residue can cause the ground coffee to stick in the feeder passages and
4 - Add an appropriate amount of coffee beans, no more than 250g each time,
because the coffee beans will become wet overnight, and doing this will cause
the same result as that of point 1.
5 - After adding the coffee beans, close the lid again and press down hard to
prevent water from entering the bean hopper, otherwise, it will cause the same
result as that of point 1.
1 - Do not let other objects enter the water tank, and cover the lid in time after
adding water.
2 - Do not place parts of the body under the drip stop while the machine is in
operation.
3 - You can also use a permanent filter instead of a disposable coffee filter. The
permanent filter and filter paper cannot be used at the same time.
4 - Be sure the filter handle is facing away from the grinder basket, so it does not
interfere with the flow of ground coffee into the filter basket.
5 - The amount of water added should be the same as the amount of powder cup
you choose, for example, if you choose 2 cups of powder and you should add
2 cups of water, otherwise, the machine will finish boiling all the water in the
water tank, which would make the coffee weak.
Regarding the Brewing Part
clog the grinder. Over time, this slows down the flow of ground coffee. The
amount of ground coffee is controlled by the grinding time after the selection
of the coffee cup. Therefore, it will not grind all the beans at one time. If it
continues to grind, the ground beans will not reach the required fineness, and
eventually, the motor will get stuck and cannot run, resulting in burnout.
2 - Do not fill the bean hopper with frozen or coated beans, moisture will seep
onto the burr and feeder channels. Over time this will cause the same result as
that of point 1.
3 - Do not add any liquid flavorings or syrups to the beans, otherwise, it will
cause the same result as that of point 1.
Loading ...
Loading ...
Loading ...