Loading ...
Loading ...
Loading ...
2221
6. Other Functions 6. Other Functions
1 - If you just want to check the auto-on time you set, long press the PROGRAM
Button then it will show on the display.
2 - Before starting the program, if you want to change the auto-on time, long
press the PROGRAM Button to get into the PROGRAM function. Press the
"HOUR" and＂MIN" buttons you need respectively to change the auto-on time.
3 - If the program has already been selected and the PROGRAM Button has
turned blue, you can no longer modify the program time, coffee strength, or
the number of cups. To make any changes you need to turn off the program
settings by briefly pressing the PROGRAM Button, and reset it by following
the section of "5.2 Operation", page 14.
NOTE
The warming plate will remain on for 120 minutes(factory default) after the
coffee is prepared. At the end of the heating process you will hear three beeps.
The switch-off time can be configured as follows: 0/15/35/45/60/75/90/100/120
minutes.
Step1 - Press the POWDER 2-10 Button for 2 seconds. You will see "120" flashing
on the display.
Step2 - Press the POWDER 2-10 Button repeatedly to set your desired switch-off
time.
6.3 Switch-Off Time Setting
Step3 - Wait a few seconds. The most recent option displayed will be applied
and the switch-off time has been set.
In order to retain a more full-bodied coffee aroma, the machine is equipped
with a blooming function. The coffee grounds are moistened with hot water
before brewing. The coffee grounds can swell up, the coffee taste becomes
more intense.
TIPS
6.4 Blooming Setting
Step 1 - Press the PROGRAM Button and STRENGTH CONTROL Button for 2
seconds. You will see “ ” and “ ” flashing on the display.
Step 2 - Press the STRENGTH CONTROL Button.
: blooming function switched on.
: blooming function switched off.
Wait a few seconds. The most recent option displayed will be applied.
6.5 Brew Pause Feature
While the coffee is brewing you can remove the carafe to pour. The drip stop
will close automatically. To avoid any overflow, replace the carafe within 30
seconds.
Press the "MIN" button to set
the minute.
Press the PROGRAM Button aga-
in, the PROGRAM Indicator will
be illuminated and the coffee
machine gets into the PROGRAM
mode.
The display will show the act-
ual time and .
The machine automatically bre-
ws coffee at 7:00AM.
4 6
7
5
Loading ...
Loading ...
Loading ...