Loading ...
Loading ...
Loading ...
1211
Both Coffee Carafe and Filter Insert
With Drip Stop are NOT DISHWAS-
HER SAFE.
NOTE
Do not fill the water tank past the
10 cup mark of water level
indicator. Doing so could cause
carafe to overflow.
NOTE
These priming steps must be
completed prior to first use.
IMPORTANT
If there is no water flowing out in
Step 2, please refer to Troubles-
hooting, page 37.
NOTE
Step 1 - Press the ON/OFF Button to
start and the Indicator will be illumi-
nated. It will get into heating.
Step 2 - The machine starts processing
the water into the carafe.
Step 3 - After all of the water has passed
through, push the ON/OFF Button
4. Before First Use 4. Before First Use
5. Making Perfect Coffee Guide
Ensure all packaging has been
removed.
4.1 Remove Packaging
Ensure the machine is always
positioned onto a dry, stable, flat
horizontal counter top.
4.2 Position Machine
Wash the parts listed below in warm
water:
- Filter Ring
- Permanent Filter
- Filter Insert With Drip Stop
- Bean Hopper Lid
- Measuring Spoon
- Coffee Carafe
Rinse & allow thorough air drying.
4.3 Wash & Dry Parts
5.1 Tips for Perfect
Coffee
4.4 Prime the Machine
- Open the lid and fill enough pure
water(recommended) in advance
then close it.
Place the Coffee Carafe on the Warming
Plate.
CleaningFill Water Tank
Place Coffee Carafe
1 - This machine is not suitable for
deep-roasted beans. Dark, greasy
beans can leave some greasy residue
on the burrs and in the feeder cha-
nnels. The oil residue can cause the
ground coffee to stick in the feeder
passages and clog the grinder. Over
time, this slows down the flow of
ground coffee. The amount of ground
coffee is controlled by the grinding
time after the selection of the coffee
cup. Therefore, it will not grind all the
beans at one time. If it continues to
Prepare the Beans
grind, the ground beans will not reach
the required fineness, and eventually,
the motor will get stuck and cannot
run, resulting in burnout.
2 - Do not fill the bean hopper with
frozen or coated beans, moisture will
seep onto the burr and feeder channels.
Over time this will cause the same result
as that of point 1.
3 - Do not add any liquid flavorings or
syrups to the beans, otherwise, it will
cause the same result as that of point 1.
4 - Add an appropriate amount of
coffee beans, no more than 250g each
time, because the coffee beans will
become wet overnight, and doing
this will cause the same result as that
of point 1.
- Insert the Power Plug into a 120V
AC power outlet & switch the power on.
- The default settings are grinding
beans and brewing 10 cups of coffee.
The time value on the screen will flash.
Power
MAX
to exist the Keep Warm Function.
Step 4 - Empty the carafe. Repeat the
above steps for 2 times.
2
6
4
8
10
Loading ...
Loading ...
Loading ...