Loading ...
Loading ...
Loading ...
7
English
A humidier is quite useful in supplying necessary moisture to dry air. It should be
used with proper care to prevent overhumidication.
A good rule of thumb would be to gauge the condensation or frost on
windows. Adjust your humidier to a point where this condition is at a
minimum. These adjustments should be made when major changes in
outdoor temperatures occur.
Humidiers can be placed in any living area that has a convenient location and
provides distribution of the moist air to the living area. The measured output of a
humidier is based upon continuous operation at standard rating conditions. With
normal variations of indoor and outdoor conditions, the humidistat-controlled
humidier will not run continuously at maximum output unless the controls are set to
do so.
INITIAL HUMIDITY REQUIREMENTS:
When initially installed or when placed in operation at the beginning of each season,
the humidier equipped with a humidistat may run constantly for a day or so and,
thus, evaporate large quantities of moisture. When the home and its furnishings
have absorbed moisture and become stabilized at the desired humidity level, the
amount of water used will diminish and the humidier operation will maintain the
desired humidity level.
GETTING STARTED
Check for Leaks
Damage due to shipping may
cause leaks in Base or Water Tank.
A visual inspection may not reveal
hairlinefractures.
1. Place humidier on a water-resistant surface.
2. Fill Water Tank with water to inspect for leaks.
3. Pour several cups of water into Base to inspect
for leaks.
Not Leaking?
Empty water from Base and install full WaterTank.
Leaking?
In the slight chance your humidier has leaks,
contact Consumer Service and we will immediately
replace damaged parts.
Before operating, ALWAYS reach under the humidier and lift from the bottom. Before use, check appliance for visible damage. DO NOT USE
if there is evidence of damage. If any damage is found, contact Vornado Air, LLC at 1-800-234-0604.
Loading ...
Loading ...
Loading ...