Vornado HU1-0068-43 UH100 Ultrasonic Humidifier

OWNER’S GUIDE - Page 11

For HU1-0068-43. Also, The document are for others Vornado models: UH100

PDF File Manual, 19 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
11
English
HIGH
Operation for fast humidication of larger rooms. High-speed
operation will evaporate approximately 2 gallons of water in 24
hours of continuous operation. (This assumes room conditions of
70º F and 30% relative humidity.)
LOW
Operation for quiet, nighttime use or smaller rooms. On Low
operation, your humidier may run without relling for extended
periods.
AUTO
Operation for more precise humidity control. Fan speed and mist
output will uctuate to better maintain set humidity level with the
minimal amount of fan noise. While in Auto, you will only be able
to mode through humidity settings (40% - 60%). Continuous will be
disabled.
HUMIDITY – 40%–60% OR CONTINUOUS
Set the humidity level by pressing the HUMIDITY button until
the desired humidication level is illuminated. The humidier will
operate until the desired humidity level is reached. At this point,
the mist and fan will turn off. If the mist and fan do not turn on,
the humidity setting may be lower than the room humidity level.
Increase the humidity set point until the mist and fan turn on. This is
an indication of the level of humidity already in the room. While in
Continuous, you will only be able to mode through High and Low
fan speeds before unit powers off. Auto mode will be disabled.
HOW TO USE
1. Position humidier to not blow directly on objects or plants. Plug
power cord into standard grounded wall outlet. Remove tape from
top of mist outlet prior to turning humidier on.
2. To turn humidier on, press Power Button. The indicator lights
for HIGH fan speed, 50% humidity will illuminate. After rst use,
humidity setting is saved when powered off. Fan speed will default
to HIGH. If unit is unplugged, during next use, settings will default
to HIGH fan speed, 50% humidity.
3. Use Power Button to select HIGH or LOW fan speed or AUTO
mode until the desired setting is illuminated.
4. The humidier will shut off when it is out of water. Rell with cool
water and resume operation.
Note: Lower humidity control settings or turn off humidier if moisture
forms on walls or windows.
Loading ...
Loading ...
Loading ...