Vornado HU1-0068-43 OWNER’S GUIDE

Loading ...

English

CLEANING

Proper cleaning of your Ultrasonic Humidier is essential to the air quality and performance of your

humidier. The frequency in which your humidier will need to be cleaned will vary depending on

use, water hardness and outside environmental factors. It is recommended, assuming average use,

to thoroughly clean the unit several times throughout the season, or when algae, mineral deposits or

other particles begin to form. Note: If the humidier is turned Off with water in Base and not turned

back on for 8 hours or longer, or if humidier is not cleaned as recommended, you may experience

some growth of algae or bacteria. These microorganisms may become airborne.

TO CLEAN BASE

1. Turn humidier Off and unplug.

Warning: Do not submerge humidier

top in water.

2. Remove Water Tank by lifting up. To easily

remove the Mist Tube, lift main body from

base. Then remove the Mist Outlet and

Mist Tube by pulling towards you. The

Outlet and Tube are two separate parts.

3. Remove the humidier body from base.

4. Wipe the exterior of the humidier with a

soft, damp cloth if needed.

5. Empty the Base. Clean Base with warm

water and a mild detergent.

6. Use brush stored at the bottom of the base

for hard to reach areas. Brush can be used

to clean out any debris or residue left in the

water trough.

7. Rinse and dry. Reassemble humidier.

8. Prior to use, ensure that the outside of the

coupler and surrounding area is completely

dry.

Note: The Base is not dishwasher safe.

Coupler

Loading ...

Vornado HU1-0068-43 UH100 Ultrasonic Humidifier