Vornado HU1-0068-43 OWNER’S GUIDE

Loading ...

10 English

Before initial use, you must soak the Mineral Cartridge in water for 24 hours. You

may use a separate container or Water Tank to do so. If Tank is used, empty water

and rell with fresh water prior to use.

Note: Spills can occur during cleaning, moving or relling the Water Tank, so be

careful to avoid spills when doing these activities.

1. Unplug humidier and place on a level surface.

Note: The unit may take several minutes to create mist with the initial use of a new

Mineral Cartridge.

2. Remove Water Tank from the base by grasping the top integrated handle

and pulling up towards you (A). CAUTION: When removing Water Tank lift

vertically, do not twist tank while still in base or Cap may disengage and

leak.

3. Turn the Water Tank upside down and remove the Cap by turning it

counterclockwise (B).

4. Gently place Water Tank on a at surface and ll with cool tap water.

5. Ensure Gasket, the rubber ring around the Water Tank, is properly positioned.

Insert the Cap into the grooves of the tank and turn clockwise until tightened.

When Cap is fully tightened the arrows on the tank will align with the indicator

lines on the Cap (C).

6. Lower Water Tank into Base, positioning Water Tank around the ledge for secure

placement (D). Once in nested position, water outlet valve inside Cap opens,

releasing water into Base.

Note: The rate of water dispensing from Water Tank into Base is controlled by the

Mineral Cartridge. The unit may take several minutes to ll the Base.

FILLING WATER TANK

A B

Gasket Ring

Loading ...

Vornado HU1-0068-43 UH100 Ultrasonic Humidifier