Loading ...
Loading ...
Loading ...
39
EN
Change a new CO
2
cartridge (no need for keg)
Please change the CO
cartridge if cannot pour beer out when the CO
pressure knob is
at “on” position and has beer in keg.
1. When turn the CO
pressure knob to “-“ position, to close the CO
supplying.
Open the lid, loose the cartridge sheath, and take out the empty CO
cartridge.
Insert a new CO
cartridge in the sheath, and screw the sheath tightly until you will
hear a “Click”, which indicates that the cartridge seal has been pierced and the
CO
avoid the CO
leakage. Then put CO
bottle sheath into the lid.
3. Close the lid of the beer cooler.
4. Turn the CO
pressure knob to “+“ position to turn on the CO
supply, and it is
ready to pour beer out.
Note: If used correctly, one CO
case of problems with the pressure regulator, refer to the “Troubleshooting” section.
WARNING
cartridge. The below
CO
cartridge information for your reference. Never use nitrogen gas
higher pressure.
CAUTION
Risk of injury! New CO
cartridges must be stored safely. Make sure
that children do not play with them.
16g CO
2
cartridge
Loading ...
Loading ...
Loading ...