Loading ...
Loading ...
Loading ...
33
EN
Beer connector
CO
connector
Figure 6 Figure 7
3. Release the lock, open the lid of the dispenser and place the well-assembled keg
into the cooling cavity. Connect the CO
connector tube and beer outlet tube with
the keg lifter tube connector.
Note: Make sure all connection of tap mechanism is well connected, and without
damage. And make sure tap valve is on close status, and the CO
pressure regulator
knob is at “Off” status.
Close
Open
Figure 8 Figure 9
4. Make sure that the pressure regulator on the lid is in the “-” position. Rotate the
cartridge holder outwardly from the upper cover assembly by an appropriate
unscrew the cylinder sleeve and install a CO
cartridge
“click” sound, indicating that the cartridge seal has been pierced and the CO
gas
upwards and snapped into the upper lid assembly. If the cartridge is replaced,
Loading ...
Loading ...
Loading ...