Loading ...
Loading ...
Loading ...
10
Timer:
Slide your finger to set the timer function from 0h to 8h.
Control Panel, Heat Enabling Switch, and Remote Control
Control Panel
Remote Control
Control Panel and Remote Control Operation
BUTTON
OPERATION
NOTES / INDICATONS
ON/OFF
Press the POWER button to turn the
fireplace on and off.
The POWER button turns the flame
effect on and off
The power must be turned ON for the control
panel and remote control to work.
When the fireplace is turned on, after being
turned off, the previous settings will resume.
FLAME
Press to cycle the flame effect from
High, to Medium, to Low, and then
back to High.
Press the POWER button to turn off
the flame effect.
The power must be turned on for the flame
effect to work.
The ember effect automatically varies
between light and dark to simulate real
embers. It cannot be controlled.
TEMP
Press to set the thermostat.
The set temperature appears in the
control panel digital display.
The thermostat will automatically turn
the heater on and off to maintain the
set temperature.
Settings start at 68°F, then increase
by 60°F up to 82°F.
Press again to turn the heater off. The
digital display will go dark.
The flame effect must be on for the heater to
turn on. If off, the heater will not turn on.
The heater will only turn on when the
thermostat setting is higher than room
temperature. When the room temperature
reaches the thermostat setting, the heater will
turn off.
To prevent overheating, the fan blows cool air
for 8-10 seconds before the heater turns on,
and after the heater turns off.
Loading ...
Loading ...
Loading ...