Loading ...
Loading ...
Loading ...
Operation
Washing a load of laundry{16.06 lb. (7.53 kg) maximum weight of clothes}
Operation
Washing a load of laundry
STEP 4: Select the appropriate cycle and options for the load
- Loading the Bleach compartment (Liquid chlorine bleach only)
1. Add chlorine bleach to the bleach compartment.
2. DO NOT exceed the bleach compartment.
3. As no water inlet to bleach dispenser, the bleach will directly load
into the tub when you pour in.
- Avoid splashing or over-filling the compartment.
Never pour undiluted liquid chlorine bleach directly onto the
load or into the tub. It is a powerful chemical and can cause
fabric damage, such as weakening of the fibers or color loss, if
not used properly.
If you prefer to use color-safe, non-chlorine bleach, add it to the
appropriate detergent compartment.
DO NOT pour color-safe bleach into the Bleach compartment.
CAUTION
- Loading the Fabric softener compartment
1. Pour the recommended amount of liquid fabric softener into the
softener compartment.
2. The dispenser automatically releases liquid fabric softener at
the proper time during the rinse cycle.
3. If using fabric softener on NORMAL cycles, please make sure to
press the FABRIC SOFTENER button on.
Use the softener compartment ONLY for liquid fabric softeners.
DO NOT use the Downy Ball in the fabric softener compartment
with this washer. It will not add fabric softener at the appropriate
time. Use the detergent compartment.
Do not use liquid fabric softener that is too sticky as it may not
mix with the water sufficiently.
CAUTION
- Select appropriate cycle by Cycle Selector according to cycle chart
on next page.
- Select appropriate option function according to cycle chart on page
20.
Note: If Eco function is selected, the Soak and Extra Rinse function
will be automatically cancelled.
- Your favorite washing Cycle
Once you have set the cycle selector and option function, you
can push and hold this “My Cycle” button for 3 seconds to
program memory this setting as your favorite cycle before
starting your appliance. The light beside the knob will flash to
confirm the memory with beeps.
- You can finish this Step by just push the “My Cycle” button once
to use your favorite cycle or make some additional change.
Cycle Fabric type Soil Level Temp ECO Delay Soak My Cycle Extra Rinse
Fabric
Softener
Extra Heavy Hot
Heavy Warm
Medium Eco w arm
Light Cold
Extra light Tap cold
Hot
Heavy Warm
Medium Eco w arm
Light Cold
Extra light Tap cold
Hot
Warm
Medium Eco w arm
Light Cold
Extra light Tap cold
Extra Heavy Hot
Heavy Warm
Medium Eco w arm
Light Cold
Tap cold
Tub Clean Extra Heavy Hot ●
Drain&spin
Warm
Eco w arm
Cold
Tap cold
Hot
Warm
Medium Eco w arm
Light Cold
Extra light Tap cold
Hot
Heavy Warm
Medium Eco w arm
Light Cold
Extra light Tap cold
Extra Heavy Hot
Heavy Warm
Medium Eco w arm
Light Cold
Extra light Tap cold
Heavy Warm
Medium Eco w arm
Light Cold
Extra light Tap cold
Hot
Warm
Medium Eco w arm
Light Cold
Extra light Tap cold
● ●
Sports
● ● ● ● ●
Normal
● ● ● ●
●
Heavy Duty
● ● ●
Whites
● ● ● ● ● ●
● ● ●
● ●●
●
Delicate
Hand Wash
● ●
● ●
Rinse&spin ●
●
Bulky
● ● ● ● ●
● ●
●
●
Colors ● ● ● ● ● ●
● ● ●
Quick
NormalNormal
WhitesWhites
Heavy dutyHeavy duty
TTub cleanub clean
Quick Quick
ColorsColors
BulkyBulky
DelicateDelicate
Hand washHand wash
Drain&spinDrain&spin
Rinse&spinRinse&spin
SportsSports
You can NOT set as favorite cycle when the Cycle Selector is
on “Tub Clean”, “Rinse&Spin” or “Drain&Spin” position.
CAUTION
STEP 3: Add detergent and additives to the dispenser
- Loading the liquid or powder detergent compartment
Refer to page 22 for recommended detergent.
1. Pour the recommended amount of laundry detergent directly
into the detergent compartment before starting your washer.
2. If you are using color-safe bleach, add it with the detergent
to the detergent compartment.
When adding color-safe bleach with detergent, it is best if both
laundry products are in the same form - liquid.
Detergent
compartment
Bleach
compartment
Softener
compartment
19
20
Delay
* Table in grey is an initial setting. Dots are all optional functions you can select.
●
Loading ...
Loading ...
Loading ...