Loading ...
Loading ...
Loading ...
Operation
Control panel
Operation
Control Panel
1
2
3 4
5 6
7
8 9 10 11 13 14 15
Power button
Press once to turn your washer on.
Press again to turn your washer off.
If the washer is left on for more than
10 minutes without Start/Pause
button being pressed, the power will
automatically turn off.
1
Cycle selector
Select the appropriate cycle for the
type of load.
The cycle you select determines the
tub pattern for the cycle.
For detail, refer to page 20.
2
My cycle
Press and hold for 3 seconds to
remember your favorite washing cycle.
Press once to load your favorite cycle
setting.
3
Soak button
Press once to select soak function.
Press again to cancel selection.
This function is especially for heavy
soiled garments to remove stains more
thoroughly by specifying additional
time.
5
Extra rinse button
Press once to add an extra rinse into
the washing program.
Press again to cancel selection.
6
Start/pause button
Press once to start the program.
Press again to pause the program. You
can’t change any setting except add a
garment.
Press again to restart the program.
7
Cycle status lights
The relative light will be lighted when
the washer is in its washing program,
say the soak will light when the washer
is operating in soak process.
When the whole program is finished,
the Done light will flash.
8
ECO wash button
Press once to select this function so
that you can save money with similar
washing performance.
Press again to cancel selection.
9
Delay button
Delay the start of any cycle for up to 24
hours in one-hour increments.
Displayed hour indicates the time the
wash will be started.
10
Soil level button
Press the button to select the soil level.
Different soil level will result in different
washing time.
11
Child lock
Press the “Soil level” and “Temp”
buttons simultaneously for over 3
seconds to activate this function.
Press again for another 3 seconds to
deactivate the function.
All selection except the “Power” will
be out of function. For detail, refer to
page 22.
12
Tap cold - Cold water with no warm
water added.
Buzzer button
15
Press once to stop the buzzer sound.
Press again to active the sound.
Washing a load of laundry
To reduce the risk of fire, electric shock, or injury to persons when using your
washer, follow important safety instructions, including the following:
WARNING
STEP 1: Power on your washer
- Sort laundry by fabric type, soil level, color and load size as needed.
Refer to FABRIC CARE CHART on page 28.
- You can fill the tub with dry, unfolded clothes. Load the tub no more
than 3/4 full.
- Overloading may reduce washing efficiency, cause excess wear,
and possibly cause creasing or wrinkling of the load.
- Wash delicate items such as bras, hosiery, and other lingerie in the
Delicate cycle with similar lightweight items.
- Wash wool items such as wool sweater in the Hand Wash cycle.
- When washing big bulky items or a few smaller items that don’t fill
the tub completely, for example, a rug, a pillow, stuffed toys, or one
or two sweaters, add a few towels to improve spin performance.
- Do not insert bulky items except for Bulky cycle.
- When washing heavily soiled loads, do not overload your washer to
ensure good cleaning results.
- To add a garment:
1. Press the Start/Pause button to pause the washer.
2. Wait for the door to unlock automatically, and then open the
door.
3. Add the item, close the door, and then press the Start/Pause
button. The cycle will resume.
Before loading your laundry, be sure to take out coins, keys
and other hard objects, and close the zip to prevent clothes
from damage.
CAUTION
STEP 2: Load your washer
- Press this “Power” button to power your washer on.
- Your washer will start up with initial setting, “Normal” on Cycle
Selector, “Medium” on Soil level, “Warm” on Temp with “--"
displayed.
Digital display
The LED digital display will show your
remaining time for cycle selected.
The initial display will be “--” for some
selected cycles.
The LED will show selected delay time
when setting the delay time.
4
17
18
Delay
12
Fabric Softener
14
If you are using fabric softener, Press
this button to set dispenser to
automatically add liquid fabric softener
to the load at the correct time.
Temp button
Press the button to select the washing
water temperature. The rinsing water
temperature will always keep in Tap
Cold.
Hot - Whites and heavily soiled,
colorfast items.
Warm - Colorfast items.
Eco Warm - Moderately soiled,
colorfast items; most wrinkle-free items
Cold - Brightly colored, very lightly
soiled items.
13
Loading ...
Loading ...
Loading ...