Loading ...
Loading ...
Loading ...
#
Changing the Answer Back Buzzer
Sound Pattern
You can select buzzer sound from 3 patterns.
a
Remove the center cover. (P.78)
b
Make sure that the Honda SMART Key is
active. (P.30)
c
Push the ignition switch to authenticate the
Honda SMART Key system. (P.34)
d
Connect the EM mode coupler provided on
the battery cover to the EM mode
connector. (P.109)
u
The Honda SMART Key indicator and
ignition switch ring go off.
e
Push the ignition switch 1 time.
f
Repeat the following 3 times:
Press the answer back button on the
Honda SMART Key 3 times and the
ignition switch 1 time.
u When the answer back button is pressed,
the Honda SMART Key LED comes on.
Make sure the LED goes off before
pressing the button again.
u If the answer back button or ignition
switch is not pressed for 1 minute, the
Honda SMART Key indicator starts
blinking and this mode will be cancelled.
If so, remove the EM mode coupler,
return to c and follow the procedure
again.
20181019183311_31K0GA000_enu_BOOK Page 48 Friday, October 19 2018 18:39:26 JST
Operation Guide
45
Continued
Answer back button Ignition switch
Ignition switch ring
Loading ...
Loading ...
Loading ...