Loading ...
Loading ...
Loading ...
Installation
1.
To install the rear wheel, reverse the
removal procedure.
Install the side collars into the left and
right side wheel hub.
2.
Tighten the rear axle nut.
Torque: 44 lbf·ft (59 N·m, 6.0 kgf·m)
3.
Tighten the brake stopper arm nut.
Torque: 16 lbf·ft (22 N·m, 2.2 kgf·m)
4.
Adjust the rear brake pedal freeplay. 2 P. 87
5.
Adjust the drive chain slack. 2 P. 93
6.
After installing the wheel, apply the brake
pedal several times, then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
A used cotter pin may not effectively secure a
fastener. Always replace a used cotter pin
with a new one.
20181019183311_31K0GA000_enu_BOOK Page 119 Friday, October 19 2018 18:39:26 JST
Tire Puncture u Removing Wheels
Troubleshooting
116
Drive chain
Rear axle
shaft
Drive chain
lock nut
Drive chain adjusting nut
Adjusting plate
Loading ...
Loading ...
Loading ...