Loading ...
Loading ...
Loading ...
36
4 The drying time of 20 minutes appears. Touch I to
start. The drying time elapses on the display. The
lamp in the cooking compartment stays off.
5 A signal sounds after 20 minutes. A message
appears in the display. Confirm with ™.
The drying program has ended. Allow the appliance to
cool down. Then polish the cooking compartment and
the panel with a soft cloth.
Descaling program
Regular descaling maintains the good condition of the
cooking compartment. The cooking compartment is
descaled, rinsed, and dried completely automatically
with the descaling program.
Depending on the type of water and use of the
appliance, a message on the display reminds you that
the descaling program should be run. If necessary
(e.g. with scaling in the cooking compartment), you can
run the descaling program more frequently.
The complete descaling program takes 2 hours
15 minutes.
For the descaling program, you need special descaling
cartridges. These are available from customer service or
from the online shop (CL S20 040 set with 4 descaling
cartridges, order number 00311768).
NOTICE: Damage to the cooking compartment: Only
use descaling cartridges for the descaling program.
Never place descaling cartridges in the hot cooking
compartment or heat them in the cooking compartment.
Notes
‒ The descaling program can only be started if the
appliance has cooled down below 104°F (40°C).
‒ Remove all accessories from the cooking
compartment before you start the descaling
program (wire rack, cooking containers, core
temperature probe).
‒ The drain filter must remain inserted in the cooking
compartment floor while the descaling program is
in progress.
‒ The appliance door is locked during the descaling
program.
‒ Always leave the descaling program run to the end.
The descaling program cannot be canceled.
‒ Even with use of the descaling and taste filter
(special accessories GF 111 100), depending on
the water type and use of the appliance, descaling
may be necessary. A message appears on the
display reminding you of this.
Starting the descaling program
1 Set function selector to S. Use the rotary selector to
select the descaling program.
2 The ‘ symbol is displayed. Press ™ to confirm.
3 The switch-off time is displayed at which the
descaling program will end.If desired, move switch-
off time with the rotary selector. Press ™ to
confirm.
4 Remove all accessories from the cooking
compartment. Press ™ to confirm.
5 Remove the locking cap from the descaling
cartridge.
9 CAUTION
Do not remove the wax plugs from the
opening of the descaling cartridge. Do not
use any other descaler.
6 Screw the descaling cartridge (a) into the socket in
the top of the cooking compartment up to the stop.
Close the appliance door. Press ™ to confirm. A
descaling time of 2 hours 15 minutes is displayed.
'U\LQJSURJUDPPH
_
(QGRIGHVFDOLQJ
D
Loading ...
Loading ...
Loading ...