Loading ...
Loading ...
Loading ...
12
Level Dryer
Check the levelness of the dryer by first placing a level on the top of
the dryer near the console.
Then, by placing a level in the crease on the side of the dryer
between the top of the dryer and the dryer cabinet, check the
levelness from front to back.
If the dryer is not level, prop up the dryer using a wood block. Use a
wrench to adjust the legs up or down and check again for levelness.
Reverse Door Swing
You can change your door swing from a right-side opening to a left-
side opening, if desired.
1. Place a towel or soft cloth on top of the dryer or work space to
avoid damaging the surface.
Remove the door assembly
1. Open the dryer door
.
2. Remove the
bottom screw from each of the 2 hinges that attach
the dryer door to the front panel of the dryer.
3. Loosen the top screw from each of the 2 hinges in Step 2.
A
B
A
B
A. Loosen these screws.
B. Remove these screws.
4. Remove the dryer door and the hinges by lifting upward on the
door. Lay the door on a flat, protected surface, with the inside of
the door facing up. Remove remaining 2 loose screws from dryer
front panel.
5. Remove the 4 plastic plugs located outside the dryer door
opening.
6. Install 4 plastic plugs into screw holes in the dryer left where the
hinges were removed in Step 4.
Loading ...
Loading ...
Loading ...