Loading ...
Loading ...
Loading ...
13
Cleaning the metal grease filter
These instructions apply to several appliance models. It
is possible that individual features are described that do
not apply to your appliance.
9 WARNING
Risk of fire
Grease deposits in the grease filter can ignite.
Clean the grease filter at least every two months.
Never operate the appliance without the grease
filter.
Notes
‒ Do not use any aggressive, acidic or alkaline
cleaning agents.
‒ When cleaning the metal grease filters, also clean
the metal grease filter holder in the appliance with a
moist cloth.
‒ You can clean the metal grease filters in a
dishwasher or by hand.
By hand:
Note: You can use a special grease solvent if soiling is
stubborn. You can order it via the online shop.
▯ Soak the metal grease filters in hot soapy solution.
▯ Use a brush for cleaning and then rinse the filters
well.
▯ Allow the metal grease filters to drip dry.
In the dishwasher:
Note: Slight discoloration is possible when cleaning the
grease filters in the dishwasher. This does not affect the
metal grease filter's functioning.
▯ Do not clean extremely dirty metal grease filters
with dishes.
▯ Loosely position the metal grease filter in the
dishwasher. The metal grease filters must not be
jammed in.
Removing and installing the metal
grease filter
Open the filter cover
1 Grip filter cover in the middle and pull upward.
Area Cleaning agent
Stainless steel Hot soapy water:
Clean with a dishcloth and then dry with
a soft cloth.
Clean stainless steel surfaces in the
grind direction only.
Special stainless steel cleaning prod-
ucts are available from customer ser-
vice or from specialist retailers. Apply a
very thin layer of the cleaning product
with a soft cloth.
Painted surfaces Hot soapy water:
Clean using a damp dishcloth and dry
with a soft cloth/towel.
Do not use any stainless steel cleaners.
Aluminum and plas-
tic
Glass cleaner:
Clean with a soft cloth.
Glass Glass cleaner:
Clean with a soft cloth. Do not use a
glass scraper.
Operating controls Hot soapy water:
Clean using a damp dishcloth and dry
with a soft cloth/towel.
Risk of electric shock from penetrating
moisture.
Risk of damage to the electronics from
penetrating moisture. Never clean
operating controls with a wet cloth.
Do not use any stainless steel cleaners.
Loading ...
Loading ...
Loading ...