Loading ...
Loading ...
3
14. Always plug heaters directly into a wall outlet. Never use with an extension cord or
relocatable power tab (outlet/power strip)
15. This electrical fireplace is not designed for “zero” clearance wall and/or cabinet/millwork
installations. Accessibility for servicing and maintenance must be possible without disturbing
building structures and/or cabinet millwork finishes.
USER INSTRUCTIONS
1. Any repairs to this unit must be carried out by a qualified and approved service person only.
2. Under no circumstance should this unit be modified. Parts having to be removed for servicing
must be replaced with original parts supplied by the manufacture only.
3. This heater can be cleaned with a damp cloth using water only. Always unplug heater before
cleaning. Do not use abrasive cleaners on this heater.
LOCATION OF YOUR FIREPLACE
When choosing a location for your new electric fireplace, ensure the general instructions for
placement are followed. Also, for the best effect, install the fireplace out of direct sunlight. It is safe to
set the fireplace insert close to non-combustibles.
MANTEL INSTALLATION
Please refer to the detailed instructions that came with the mantel you purchased.
FLANGE INSTALLATION
ELECTRICAL CONNECTIONS
A 15-amp, 120-volt, 60-hz circuit with a properly grounded outlet is required to operate this heater.
Preferably, the fireplace insert will be on a dedicated circuit as other appliances on the same circuit
may cause the circuit breaker to trip or blow a fuse when the heater is in operation. This unit comes
with a standard 6-foot long 3-wire cord, exiting out the back of the fireplace insert. Plan the
EF-BLT09
Loading ...
Loading ...
Loading ...