Loading ...
Loading ...
Loading ...
12 13
Playing a Cassette Tape
1. When a cassette tape is inserted, its music will start playing after a few seconds.
2. Make sure the Volume control dial is in correct position.
3. When removing or stopping playback of the cassette tape, fully press the Eject
/ button.
Skip Tracks
When the cassette tape is playing, press the Eject / button halfway down to
fast forward through the tape.
NOTE: To avoid damage to the cassette mechanism and your tape, always press the
Eject button between each operation.
CONNECTING HEADPHONES
Adjust the turntable volume to minimum before connecting headphones/
earphones to the headphone jack. Headphones/earphone should have a 3.5mm
diameter stereo plug and an impedance of 8-32 ohms. When headphones are
connected, sound from the turntable’s internal speakers will automatically stop.
NOTE: Extended listening of music at high volume may damage hearing. It is highly
recommended to listen at comfortable volume levels.
RECORDING
This turntable can record music from a CD disc/Vinyl/Cassette/Aux to a USB
memory/storage device.
1. Connect to power and press the button to turn on the turntable.
2. Insert a USB device into the USB port.
3. Press the Function button to select the desired mode you want to record.
• Recording from a CD: Place the CD disc into the CD compartment. Press the
button to start playing and press
/
or +10 button to search for the track to
be recorded.
• Recording from a vinyl record: Place the record on the turntable and move the
Tone Arm to the desired starting point over the record.
• Recording from a cassette: Place cassette tape into the cassette slot. Press in the
Eject / button halfway down to fast forward through the tape.
• Recording from Aux In: Connect the external device to the AUX IN Jack. Start
playback of the device’s music.
4. After the above media’s playback has started, press the Record button to start
recording. “ rEO” will show on the display.
5. To stop recording, press the Record button once.
6. To play the recorded file, press the Function button to select USB mode and
press the
button to start playback. Press the
/
buttons to search
previous/next tracks.
NOTES:
• Don’t forget that you must return the Tone Arm to the Tone Arm Rest manually after
recording.
• Make sure the USB device has enough available memory for all the recordings.
• Bluetooth/AM Radio/FM Radio and Aux out cannot be recorded.
MAINTENANCE AND CARE
• Always remove the power cable plug from the power outlet before cleaning the
turntable.
• Clean the turntable with a slightly damp cloth. Do not use any chemical or
abrasive cleaning agents.
• If you do not intend to use the turntable for a long period of time, store it in a
clean, dry place away from direct sunlight.
Loading ...
Loading ...