Loading ...
Loading ...
Loading ...
30
BREWER DOES NOT HAVE POWER
• Plug the brewer into an independent outlet without dimmer control.
• Check to be sure that the brewer is plugged in securely.
• Plug the brewer into a different outlet.
• Reset your home’s circuit breaker if necessary.
• Press and hold the Power Button and ensure the Touch Display is illuminated.
BREWER WILL NOT BREW
• After placing a pod in the Pod Holder, make sure the Handle is lowered completely and the
Touch Display displays the appropriate brew screen. Follow the brewing instructions in
SECTION 1 (refer to pages 10 – 11).
• If the Touch Display indicates “More Water Please.” add water to the Water Reservoir or
make sure the Water Reservoir is seated properly in its Base.
• If the Touch Display indicates “More Water Please.” even after refilling, remove the Water
Reservoir and empty the water. Then thoroughly clean (refer to page 18). Fill the Water
Reservoir to the MAX FILL line, return it to the brewer and ensure it is seated properly in
its Base.
• The Pod Holder may need to be cleaned (refer to pages 19) or the brewer may need to be
descaled (refer to pages 25 – 26).
• If you have completed the above procedure two times and this situation persists, contact
Customer Service at 1.866.901.BREW (2739).
TROUBLESHOOTING
Loading ...
Loading ...
Loading ...