Sun Joe 24V-XFP5-LTE 24-Volt iON+ Cordless 5.0-GPM Transfer Pump Kit

OPERATOR’S MANUAL - Page 8

For 24V-XFP5-LTE.

PDF File Manual, 20 pages, Read Online | Download pdf file

24V-XFP5-LTE photo
Loading ...
Loading ...
Loading ...
8
Technical Data
Battery Voltage
*
....................................
24 V D.C.
Battery Capacity
..................................
2.0 Ah
Battery Run Time Max
..........................
20 min
Charger Input
........................................
100 – 240 V AC,
50 - 60 Hz, 50 W
Charger Output
.....................................
25.2 V DC
1.4 A
Charge Time Max .................................
80 min
Motor
....................................................
150 W
Max Water Inlet Temperature ...............
104ºF/40ºC
Intake Hose Length ..............................
5.9 ft (1.8 m)
Max Flow Rate .....................................
330 GPH
Max Head Height .................................
52 ft (15.8 m)
Max Suction Lift
...................................
13 ft (4 m)
Fittings ..................................................
3/4" GHT male
Enclosure ..............................................
Type 2
Weight (unit only) ..................................
4 lbs (1.9 kg)
Weight (with battery installed) ..............
5 lbs (2.3 kg)
* Initial no-load voltage, when fully charged, peaks at 24 volts; nominal voltage
under typical load is 21.6 volts.
Unpacking
Carton Contents
Cordless transfer pump
Puddle strainer
Intake hose
Oil bottle
M5 tapping screws (4)
24V iON+ lithium-ion battery
24V iON+ lithium-ion charger
Manuals with registration card
1. Carefully remove the transfer pump and check to see that
all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you nd damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new cordless
transfer pump. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils,
or small parts. These items can be swallowed and pose a
suocation risk!
mWARNING! Do not insert battery until assembly is
complete. Failure to comply could result in accidental starting
and possible serious personal injury.
Battery Pack Operation
The equipment is powered by a lithium-ion battery. The battery
pack is completely sealed and maintenance free.
Battery Charge Level Indicator
The battery pack is equipped with a push button for checking
the charge level. Simply press the push button to read o the
battery charge level from the LEDs of the battery indicator:
All 3 level monitoring LEDs are lit: Battery charge level
is high.
2 level monitoring LEDs are lit: Battery charge level is
decreasing. Stop work as soon as possible.
1 level monitoring LED is lit: Battery is at. Stop work
IMMEDIATELY and charge the battery. Otherwise the
battery’s service life will be greatly shortened.
NOTE: If the charge level button does not appear to be
working, connect to the charger and charge as needed.
NOTE: Immediately after using the battery pack, the charge
level button may display a lower charge than it will if checked
a few minutes later. The battery cells “recover” some of their
charge after resting.
Charger Operation
mWARNING! Charge only 24V iON+ lithium-ion battery
pack with its compatible 24V iON+ lithium-ion charger. Other
types of batteries may cause personal injury and damage.
To reduce the risk of electric shock, do not allow water to ow
into the charger's AC/DC plug.
Charge level button
The battery is at 30% capacity
and requires charging
The battery is at 60% capacity
and requires charging soon
The battery is at full capacity
Light IndicatorsLights
Loading ...
Loading ...
Loading ...