Loading ...
Loading ...
Loading ...
14 ENGLISH
8 Press the On/O button to start the cooking process.
Note
• During cooking the temperature and time are shown alternately.
• The last cooking minute counts down in seconds.
• Refer to the food table with basic cooking settings for dierent types of food.
• When the cooking process is started and your Airfryer is paired with your smart
device, you can see, control and change the cooking parameters also in the
NutriU App.
• To change the temperature unit from Celsius to Fahrenheit or the other way
around on your Airfryer, press the temperature up and down button at the
same time for about 10 seconds.
Tip
• During cooking, if you want to change the cooking time or temperature, press
the corresponding up or down button at any time to do so.
• To pause the cooking process, press the On/O button. To resume the cooking
process, press the On/O button again to continue the cooking process.
• The device is automatically in pause mode when you pull out the pan and the
basket. The cooking process continues when the pan and the basket are put in
the appliance again.
Note
• If you do not set the required cooking time within 30 minutes, the appliance
automatically shuts o for safety reasons.
• Some ingredients require shaking or turning halfway through the cooking time
(see ‘Food table’). To shake the ingredients, pull out the pan with the basket,
place it on a heat resistant work top, slide the lid and press the basket release
button to remove the basket and shake the basket over the sink. Then put the
basket into the pan, and slide them back into the appliance.
• If you set the timer to the half of the cooking time and you hear the timer bell
it is time to shake or turn the ingredients. Be sure to reset the timer to the
remaining cooking time.
9 When you hear the timer bell, the cooking time has elapsed.
Note
• You can stop the cooking process manually. To do this, press the On/O
button.
Loading ...
Loading ...
Loading ...