Loading ...
Loading ...
Loading ...
Preventive Maintenance - T400
Preventive Maintenance - T400 (T401 & T402)
35
Preventive Maintenance is the responsibility of the owner and not covered under warranty.
(Example of changing oil and rotating tires on new car.)
To maximize the life of your treadmill, and minimize downtime, all BODYCRAFT equipment requires regular cleaning
and maintenance performed on a scheduled basis. Always unplug the power cord from the wall before servicing near
potential moving parts or under the hood. ONLY qualified service professionals or BODYCRAFT dealers should
remove the motor hood.
Service icon on the display
● A service Icon on the console will turn on periodically to remind the owner that cleaning & maintenance is needed.
After service is completed, press STOP for 5 seconds to return IDLE mode or on Touch Screens follow the prompts.
Daily Maintenance Items
● Clean entire machine using water and mild detergent such as "Simple -Green" (cleaning agents should
be alcohol and ammonia free), including console, handlebar / grip area and running belt.
● Check Emergency Stop Key and tether cord for proper operation.
Monthly Maintenance Items
● Vacuum under treadmill and wipe off all dirt around rollers & belt/deck areas.
● Inspect power cord for damage, inspect hand grip areas. and inspect the
Emergency Stop tether cord.
● Check running belt for proper tension, adjust if needed. It is especially important to check the running belt for tension
after the first 30 days of usage. All new belts will stretch, and belt slippage can be detected by users if the running belt
does not have the proper tension.
Quarterly / Semi-Annual Maintenance Items
● Unplug the power cord from the wall, then remove the front plastic cover, and vacuum entire inside area of the
machine - be careful when working around the lower PC board not to bump any wires or connections loose.
● Check drive belt for visible wear, i.e., cracking, tears, etc. The belt should be replaced if there are any visible signs
of damage. Proper alignment of the pulley needs to be confirmed.
Annual Maintenance Items
● Unplug the power cord from the wall, inspect the underside of running belt for damage - checking /cracking, glazed
surface.
● If the belt has damage or wear to it that warrants replacement. please note
that the running deck must also be flipped when a new belt is installed. If
the deck has previously been flipped and no longer has an unused side
available. it needs to be replaced when the new belt is installed.
● Unplug the power cord from the wall, clean between belt and deck
with a large towel, then lube with BODYCRAFT deck lube. Walk-in
lube for 1 min, then run belt at 8 mph for 2 mins.
● Start the unit and raise incline settings to maximum height. Turn power switch off at front of the machine to prevent
it from lowering accidentally. Lubricate incline motor screw (Recommend using a Super Lube branded grease with
PTFE {Teflon} additive).
● During normal operating conditions. the running belt and deck replacement should be done every 20,000 miles.
Loading ...
Loading ...
Loading ...