User Manual Huawei WIFI AX3 Plus Smart WiFi Router

It should however I did not install mine yet
You would get 2 wifi channels(2 wifi networks 5ghz, and 2.4ghz) with that and for camera you could connect via 2.4ghz channel

• If your device did not detect the router's Wi-Fi: Ensure that the router is powered on. Wait for a
moment (till the router is started) and try to search again on your device.
• If you cannot visit the router's configuration page on your device: Ensure that your device is
connected to the router's Wi-Fi network, and then enter 192.168.3.1 in the browser to visit this
page on your device.
• If the page displays "Cable disconnected": Ensure that the router's WAN port is connected to
the modem's LAN port, and the modem has Internet access. Check that all joints are securely
connected and in good contact, and the network cables are in good condition.
If the issue persists, restore the router to the factory settings, and follow the guide to reconnect the
cables and configure the router

Hello, AX3 Dual-core routers(RAM 128MB) are equipped with Huawei’s self-developed Gigahome Dual-core 1.2 GHz CPU, while AX3 Pro routers (RAM 256MB) use Gigahome Quad-core 1.4 GHz CPU. The main difference is that the AX3 Dual-core is equipped with two independent signal amplifiers, and the AX3 Pro uses a 2.4GHz / 5GHz amplifier (four in total). In addition, the AX3 Pro also supports one-touch networking. So turning on the NFC function of the Android phones and tapping the router’s NFC area will ensure a fast and secret-free connection.