Loading ...
Loading ...
Loading ...
ENGLISH
INSTALLATION INSTRUCTIONS CONT.
PROPER AIR CIRCULATION
• To ensure your refrigerator works at the maximum efficiency it was
designed for, you should install it in a location where there is proper air
circulation, plumbing and electrical connections. Your refrigerator is not
designed to operate in temperatures below 55°F (12°C) or above 95°F
(35°C).
• Do not install your refrigerator in any location not properly insulated or
heated, e.g. garage, etc.
• Keep out of direct sunlight and away from heating sources such as
radiators, heaters and cooking appliances.
• The following are recommended clearances around the refrigerator:
Sides and Top ………. 1” (25mm) Back ………. 2” (50mm)
TOOLS NEEDED FOR INSTALLATION
DO NOT USE POWER TOOLS TO INSTALL DOOR HANDLES!
OVERTIGHTENING THE SCREWS COULD STRIP THE THREADS!
Front Grille
Phillips
Screwdriver
T25 Torx
Screwdriver
(Select Models)
Pliers
5/16 & 3/8
Wrenches
Adjustable
Wrench
Or
PARTS INCLUDED
PARTS INCLUDED MAY DIFFER BASED ON UNIT PURCHASED.
NOTE: Select models may include an extra logo badge.
For models that come with handle mounting
screws installed on the faces of the doors, the
parts included will consist of:
• 2 handles
• Front grille
• 4 door edge handle mounting screws
• Owner`s manual
• Extra logo badge (select models)
For models that do not come with handle
mounting screws installed on the faces of the
doors, the parts included will consist of:
• 2 handles
• Front grille
• 2 door face handle mounting screws
• 4 door edge handle mounting screws
• 2 handle cover/trim pieces
• Owner’s manual
IF YOUR REFRIGERATOR COMES WITH A FACTORY-INSTALLED WATER VALVE AND
TUBING, DO NOT CONNECT A WATER SUPPLY TO THE WATER VALVE ON THE REAR OF
THE REFRIGERATOR UNTIL AN ICE MAKER IS INSTALLED.
PAGE 6 ● SET UP & USE
Loading ...
Loading ...
Loading ...