Krups EA829850 Capuccino Bar Super Automatic

User Manual - Page 8

For EA829850.

PDF File Manual, 50 pages, Read Online | Download pdf file

EA829850 photo
Loading ...
Loading ...
Loading ...
YOUR APPLIANCE HAS BEEN DESIGNED TO WORK EXCLUSIVELY WITH COFFEE BEANS.
When preparing your rst co󰀨ee, after a long period of non-use or following cleaning or descaling, a little steam and
hot water will come out of the steam nozzle (self-priming).
Splashing or scalding may occur if the co󰀨ee outlet is set too high for the size of your cups.
Preparing an espresso
The quantity of water required for an espresso is between 0.7 and 2.4 oz.
Press the
button, wait for pre-heating to end and, if you wish, carry out a rinsing operation.
The drinks selection menu appears (14).
Place a cup under the co󰀨ee outlet. You can lower or raise the co󰀨ee outlet to suit the size of your cup (15).
Select your drink with the rotating dial and conrm by pressing the conrmation dial.
You can set the volume of water at any time with the rotating dial.
To stop the co󰀨ee brewing cycle, either press a button or reduce the volume with the rotating dial.
Preparing a co󰀨ee
The quantity of water required for a co󰀨ee is between 2.7 and 5.4 oz.
Preparing a long co󰀨ee
The quantity of water required for a long co󰀨ee is between 4.1 and 8.1 oz. The appliance automatically carries out a double cycle,
so do not remove your cup before preparation is nished.
After grinding, the ground co󰀨ee is moistened with a little water. A few moments later, the brewing cycle begins.
You can adjust the temperature of your co󰀨ee.
DO NOT REMOVE THE TANK BEFORE THE END OF THE CYCLE (around 15 seconds after the co󰀨ee has nished
pouring).
Two-cup function
Your appliance enables you to prepare two co󰀨ee or espresso recipes for the following three preparations: espresso/strong
espresso/co󰀨ee. This function is not available for long co󰀨ee drinks. The appliance will automatically run two complete co󰀨ee
preparation cycles one after the other. You should therefore ensure that you place the second cup beneath the co󰀨ee outlet
immediately after the rst cycle has nished.
You have prepared your appliance. The drinks selection menu has appeared (14).
Place a cup under the co󰀨ee outlet. You can lower or raise the co󰀨ee outlet to suit the size of your cup (15).
Select your drink and conrm by pressing quickly twice on the conrmation button.
A message will indicate that you have requested two cups.
The appliance will automatically run two complete co󰀨ee preparation cycles, one after another.
PREPARATION OF AN ESPRESSO OR A COFFEE
Install the steam nozzle attachment on the machine. Select the hot water recipe from the drinks selection menu. A message
invites you to place a container beneath the steam nozzle. You can start hot water production by pressing the conrmation button.
To interrupt the hot water function, simply press any button.
If the nozzle is obstructed, unblock it with the needle provided.
The maximum quantity of water per cycle is limited to 10.14 oz.
PREPARING HOT WATER
6
Loading ...
Loading ...
Loading ...