Loading ...
Loading ...
Loading ...
EN
Insert the steam nozzle (5).
Place a 20 oz container beneath the steam nozzle (6).
Later installations or when replacing a lter: Select the “Filter” menu by pressing PROG: “Maintenance” - OK - “Filter”-
OK - “Insert” (or change) - OK - and follow the on-screen prompts.
Automatic rinsing
When rst using your machine, you may choose to activate automatic rinsing. To do this, choose the “YES” option on the
“Auto rinse” menu. Rinsing will take place each time you turn on the machine.
To modify this at a later time, you can select automatic rinsing by pressing PROG – Settings - Auto rinse.
DURING RINSING OPERATIONS, HOT WATER COMES OUT FROM THE NOZZLES. BE CAREFUL NOT TO SCALD
YOURSELF.
NEVER PUT GROUND COFFEE IN THE COFFEE CONTAINER
Use of coee beans that are oily, caramelised or avored is not recommended for this machine. This type of bean may damage
the machine.
Make sure that no foreign objects such as small stones among the coee beans enter the coee container. Any damage due to
foreign objects having entered the coee container is not covered by the warranty. Do not put water in the coee bean container.
To avoid staining your countertop or scalding yourself with used water, ensure you attach the drip collector tray.
Check if the water tank is clean.
First use/setting up the machine
The rotating dial enables you to select a function or increase/reduce values. Pressing this dial conrms your choice.
Switch the appliance on by pressing the “On/O” dial (9). Follow the on-screen prompts in the “Language choice” menu.
Select a language using the rotating dial. The selected language will be highlighted (10-11).
Conrm by pressing the conrmation dial (12).
On the rst use, the appliance will ask you to set a number of settings. If you unplug your appliance, you will have to reset some
of these settings.
The appliance will ask you to set:
Language You can select the language of your choice from those presented.
Volume unit You can set the unit of measurement to ml or oz.
Date You can set the date.
Clock You can select the display of a am/pm or 24-hour clock.
Auto-o You can select the length of time after which your appliance will switch o automatically.
Auto-on You can automatically start pre-heating of your appliance at a pre-designated time.
Water hardness You must set the hardness of your water between 0 and 4. See the section “Measuring the
water hardness”.
Automatic rinsing You can set rinsing to take place each time the machine is switched on.
Filter You must indicate whether or not a lter is present (Claris - Aqua Filter System cartridge).
On rst use, the appliance may ask for the water tank to be relled. Simply follow the on-screen prompts.
Circuit rinsing
Coee circuit rinsing:
You can start rinsing at any time by pressing PROG to display the menus then selecting MAINTENANCE
OK RINSING
OK.
Steam circuit rinsing:
Install the steam nozzle (5) then place a container beneath the steam nozzle. Select the hot water recipe on the screen and
conrm. The cycle will stop automatically after the volume of water indicated on the screen has been owed through.
It is a good idea to carry out one or more rinses of the two circuits when the appliance has not been used for a number of
days.
DURING THE RINSING OPERATIONS, HOT WATER COMES OUT OF THE NOZZLES. BE CAREFUL NOT TO SCALD
YOURSELF.
Preparing the grinder
You can adjust the strength of your coee by setting the grind neness of the coee beans.
The ner the coee is ground, the stronger and creamier the coee will be.
Set the grind neness by turning the dial “Grind neness setting”.
Turning towards the left means ner grinding. Turning towards the right means coarser grinding - (13).
YOU MUST ONLY CHANGE THE SETTING DURING GRINDING.
NEVER FORCE THE GRIND FINENESS SETTING DIAL.
5
Loading ...
Loading ...
Loading ...