Loading ...
Loading ...
Loading ...
ASSEMBLY CONTINUED
BIKE ASSEMBLY CONTINUED
17 Plug the monitor cable into the back of
the touchscreen. Use the velcro strap to
secure it to the monitor arm.
18 Add a water bottle cup to each side
of the front shroud using two M5x8
screws and a 3mm Allen wrench.
19 Screw the pedals into the crank arms.
The left pedal is reverse-threaded.
20 Using a torque wrench and a 15mm
crowfoot, tighten each pedal to 25 lb-ft.
Be careful not to over-tighten
the pedals.
21 Plug the power cord into the power
supply and the back of the bike. Plug
the power supply into an outlet.
22 Check that the bike is stable. If it rocks
or wobbles, adjust the outer feet on
each stabilizer until all feet rest rmly
on the ground.
17
19
18
21
22
26
Loading ...
Loading ...
Loading ...