Loading ...
Loading ...
3 / 4
5
6
7
Install interior assembly
Set locking and unlocking direction
Optional: Re-key the lock
Remove the battery cover.
A
Align the colored edges of the connectors
and ensure a tight cable connection.
D
Test the turnpiece for smooth rotation.
G
E
Secure the interior assembly with
the supplied screws.
H
Reinstall battery cover and make sure the
latch is still in the unlocked position.
I
Make sure the torque blade is still in the horizontal
position and install the interior assembly.
F
Load 4 AA batteries into the interior
assembly. For best results, use new, non-
rechargeable Alkaline batteries only.
B
Press and hold the Reset button on the interior
assembly for 5 seconds, until you hear 3 long beeps.
C
unlocked
Ensure correct
polarity.
If turnpiece
doesn’t rotate,
repeat steps 5E
and 5F, making
sure to rotate
the turnpiece
AWAY from the
door edge.
horizontal
door
edge
Note: Turnpiece
may move
on its own.
45°
H
H
L (x3)
J
J
Press the Lock button. The latch bolt will extend to lock.
The latch bolt will extend and retract. The lock will
beep and the keypad will turn green or red.
C
B
While the door is OPEN and UNLOCKED, enter the following
code to teach the lock the orientation of the door:
If needed, re-key the lock to
work with your existing key. See
the supplied SmartKey Re-Key
instructions for more information.
A
Enter the default User Code (1234), then press the Lock button. The door will unlock.
During normal
operation, press the
Lock button to lock
the door.
= Lock button
D
Enter User Code.
Default: 1234
Press .
IMPORTANT: It is recommended that you replace the default Mastercode
and default User Code with codes of your own. See page 4.
During normal
operation, press
after entering
your user code to
unlock the door.
1
2 4
3
5
6
7 9
8
0
This is your default Mastercode.
Note: Each button on the keypad represents two numbers.
You only need to push the button once to get either number.
Green (with 2 beeps): The door has
successfully learned the orientation
of the door. Continue to step 6C.
Red (with 3 beeps): Make sure
the door is unlocked and that
you are using a fresh set of
batteries. Repeat step 6A.
D
IMPORTANT: Rotate the turnpiece AWAY
from the door edge and make sure the latch
is fully retracted (in the unlocked position).
1. Press 0000.
2. Press . You will hear one beep.
3. Press 0.
4. Press .
unlocked
Loading ...