Loading ...
4
Install exterior assembly
Route the cable below the latch.
A
Insert the torque blade through the
horizontal slot in the latch.
D
Secure the mounting plate with the supplied screws.
G
IMPORTANT: Hold the exterior assembly
on the outside irmly (or have a second
pair of hands) for the next steps.
E
Insert the key and test the latch for smooth operation.
H
Push the torque blade through the center
hole in the mounting plate and send the
cable through the bottom hole.
F
IMPORTANT: Make sure the latch is fully
retracted (in the unlocked position).
B
IMPORTANT: Make sure the torque
blade is in the horizontal position.
C
cable
exterior side
of door
unlocked
horizontal
horizontal
slot
Remove the key and make sure the latch
bolt is still in the unlocked position.
I
unlocked
If latch does
not operate
smoothly,
adjust screws.
F
Keep
parallel to
door edge.
M (x2)
torque blade in
center hole
cable in
bottom hole
interior side of door
G
unlocked
2 / 4
Diameter is 21/8" (54 mm) Diameter is 11/2" (38 mm)
21/8"
54 mm
11/2"
38 mm
No adjustment is required.
Proceed to step 4.
What is the diameter of the hole in the door?
A
B
Remove adapter ring from exterior assembly:
Use pliers to remove two tabs from mounting plate:
tabs
1. Remove gasket. 2. Remove adapter
ring from exterior
assembly.
3. Reinstall gasket,
ensuring tight seal.
E
G
or
3
Prepare keypad and mounting plate (only for doors with smaller holes)
Loading ...
Loading ...