Loading ...
Loading ...
Loading ...
uu
If the Battery Is Dead
u
Jump Starting Procedure
704
Handling the Unexpected
Once your vehicle’s engine has started, remove the jumper cables in the following
order.
1. Disconnect the jumper cable from your vehicle’s ground.
2. Disconnect the other end of the jumper cable from the booster battery -
terminal.
3. Disconnect the jumper cable from your vehicle’s battery + terminal.
4. Disconnect the other end of the jumper cable from the booster battery +
terminal.
Have your vehicle inspected by a nearby service station or a dealer.
■
What to Do After the Engine Starts
1What to Do After the Engine Starts
The Vehicle Stability Assist
TM
(VSA®) system, Vehicle
Stability Assist
TM
(VSA®) OFF, Adaptive Cruise Control
(ACC) with Low Speed Follow
*
, safety support and low
tire pressure/ TPMS
*
indicators may come on in amber
along with a message in the gauge when you set the
power mode to ON after reconnecting the battery.
Drive a short distance at more than 12 mph (20 km/h).
Each indicator should go off. If any do not, have your
vehicle checked by a dealer.
* Not available on all models
22 CIVIC 5D PET HMIN-31T406000.book 704 ページ ２０２１年７月２８日 水曜日 午前１１時４１分
Loading ...
Loading ...
Loading ...