Loading ...
Loading ...
Loading ...
630
Driving
Turbo Engine Vehicle
*
Handling Precautions
The turbocharger is a high-precision device to obtain greater horsepower by
delivering a large volume of compressed air into the engine using a turbine driven by
the engine’s exhaust gas pressure.
• When the engine is cold just after starting, avoid hard or sudden acceleration.
• Always replace the engine oil and engine oil filter according to the Maintenance
Minder
TM
. The turbine rotates at very high speeds over 100,000 rpm and its
temperature reaches over 1,292°F (700°C). It is lubricated and cooled by engine
oil. If you fail to replace the engine oil and filter at the scheduled distance or
interval, deteriorated engine oil may cause failure such as sticking and abnormal
noise of the turbine bearing.
1Turbo Engine Vehicle
*
The scheduled maintenance intervals for replacing
the filter is indicated on the driver information
interface. Follow the information on replacement
timing.
2 Maintenance Minder
TM
P. 635
The Engine temperature too hot. Do not drive.
Allow engine to cool. or Engine temperature
near limit. Avoid heavy acceleration and high
speed. message may appear on the driver
information interface when you restart the engine
after driving under high load conditions such as at
high speed or in hilly terrain.
This is normal. The message goes off after you idle or
drive the vehicle for about one minute.
The temperature gauge pointer is at the mark
when you restart the engine after driving under high
load conditions such as at high speed or in hilly
terrain. This is normal. The gauge goes down after
you idle or drive the vehicle for about one minute.
Models with B-type meter
H
* Not available on all models
22 CIVIC 5D PET HMIN-31T406000.book 630 ページ ２０２１年７月２８日 水曜日 午前１１時４１分
Loading ...
Loading ...
Loading ...