Loading ...
Loading ...
Loading ...
b Unlock (retract bolt).
1. Find User Code A on the
label located on the cover
of these instructions.
2. Enter User Code A
(four digits) into the
keypad.
Did bolt retract?
Yes. Lock is
installed correctly.
No. Lock is not installed
correctly. Remove lock and
reinstall. Pay close attention
to cam position in step 1.
3. Rotate thumbturn away
from door edge.
Quick Programming Reference
Adding User Codes*
Enter
Programming Code
(six numbers)
Press Press
Enter new
User Code
(four numbers)
Enter same
new
User Code
(four numbers)
Wait for
3 Orange Lights +
3 Beeps
Keypad
turns
blue
Wait for
3 Orange Lights +
3 Beeps
Wait for
3 Orange Lights +
3 Beeps
Success!
1 Green Light +
Long Beep
*Thesefournumbersmustbedifferentfromtherstfournumbersoftheprogrammingcode.
Deleting User Codes
Enter
Programming Code
(six numbers)
Press Press
Enter unwanted
User Code
(four numbers)
Enter same
unwanted
User Code
(four numbers)
Wait for
3 Orange Lights +
3 Beeps
Keypad
turns
blue
Wait for
3 Orange Lights +
3 Beeps
Wait for
3 Orange Lights +
3 Beeps
Success!
1 Green Light +
1 Long Beep
Changing the Programming Code*
Enter
Programming
Code
(six numbers)
Press Press Enter New
Programming
Code
(six numbers)
Enter Same New
Programming Code
(six numbers)
Wait for
3 Orange Lights +
3 Beeps
Keypad
turns blue
Wait for
3 Orange Lights +
3 Beeps
Wait for
3 Orange Lights +
3 Beeps
Success!
1 Green Light +
Long Beep
*TherstfournumbersmustbedifferentfromalloftheUserCodescurrentlyinthelock.
More Programming, Warranty, and Registration Information
For more programming, warranty, and service information, go to
schlage.com/faqs-keypad, or use a mobile device with the code
below:
Register your product at RegisterMySchlage.com, or use a mobile
device with the code below:
Loading ...
Loading ...
Loading ...