Loading ...
Loading ...
Loading ...
en Troubleshooting
40
Fault Cause and troubleshooting
A warning signal
sounds and
flashes.
The door alarm is
switched on.
The appliance door is open.
▶
Close the appliance door.
The temperature dis-
play (freezer compart-
ment) flashes, a warn-
ing signal sounds and
the symbol
flashes.
The temperature
alarm is switched on.
Different causes are possible.
1. Press .
a The alarm is switched off.
2. After several hours, check whether the set freezer
compartment temperature has been reached again.
The exterior ventilation grilles are blocked.
▶
Remove any obstructions from in front of the exter-
ior ventilation grilles.
The temperature dif-
fers greatly from the
setting.
Different causes are possible.
1.
Switch off the appliance. →Page18
2. Switch the appliance back on after fiveminutes.
→Page18
‒ If the temperature is too warm, check the temper-
ature again after a couple of hours.
‒ If the temperature is too cold, check the temper-
ature again on the following day.
Water is leaking out of
the appliance.
The water connection or water hose is not leak-tight.
▶
Check if the water connections are fastened firmly
and the water hose is undamaged.
If necessary, replace the water hose.
Water output is re-
duced.
Low water pressure.
▶
Check the water pressure of the water supply sys-
tem or the external water filter system, e.g. reverse
osmosis system.
Connect the appliance only to a water connection
with sufficient water pressure. →Page9
The water filter is blocked.
▶
Change the water filter. →Page30
Water is dripping from
the water dispenser.
Air is in the water system.
▶
Keep dispensing water until it contains no more air.
The water dispenser is
not functioning.
There is no water supply.
▶
Ensure that there is a water supply and that the
corner valve on the water connection is open.
Contact an installer if necessary.
Kink in the water hose.
Loading ...
Loading ...
Loading ...