Loading ...
Loading ...
Loading ...
DAILY USEEMERGENCY
PREPARATION
You turn off the
room lights for
the night, and
the GREEN light
pulses once.
WHITE light.
BLUE rotates.
Sleep well thanks to
Nightly Promise.
Press the Nest button.
Nest Protect will walk
you through next steps.
Nest Protect has tested
its sensors and batteries
to confirm they are
working correctly.
Pathlight lights your way at
night as you pass under it.
To set up or run
a manual test.
“READY. PRESS TO TEST.”
WHAT YOU HEAR WHAT IT MEANS WHAT TO DOWHAT YOU SEE
DAILY USE AND EMERGENCY PREPARATION
WARNING
• DO NOT stand close to the alarm when
the horn is sounding. Exposure at close
range may be harmful to your hearing.
When testing, step away before the
horn starts sounding.
• If the alarm ever fails to test correctly,
have it replaced immediately! If the alarm
is not working properly, it cannot alert you
to a problem.
• DO NOT use a match, cigarette or any other
makeshift fire to test the smoke alarm.
• To test the CO alarm, NEVER use vehicle
exhaust! Exhaust may cause permanent
damage and will void your warranty.
• NEVER use an open flame of any kind
to test this alarm. You might accidentally
damage or set fire to the unit or to
your home.
1514
DAILY USE
NIGHTLY PROMISE
Nest Protect continuously tests itself, so
you don’t have to wonder if it’s working.
Nightly Promise reports on every Nest Protect
in your home.
When you turn out the lights for the night,
Nest Protect will glow green for a moment -
that means everything is working. If it glows
yellow, one of the Nest Protects in your
home needs your attention. For instance, the
batteries are low, Wi-Fi is down, or there’s an
issue with the sensors. Just push the Nest
button or use the Nest app to see what’s wrong.
PATHLIGHT
Usually Nest Protect has its light turned
off, but it can light your way as you walk
underneath it in the dark. You can enable or
disable Pathlight and set its brightness with
the Nest app.
DAILY USE AND EMERGENCY PREPARATION
EMERGENCY PREPARATION
TESTING
Perform a manual test of your battery powered
Nest Protect at least weekly. During a test, all
interconnected Nest Protects in your home
check their sensors, power, Wi-Fi connection,
emergency horn, speaker and microphone.
When you run a test, Nest Protect will give you
a countdown before sounding the alarm so you
have time to move away from the loud noise.
Test procedure:
1. Start a test by pressing the Nest button twice.
2. Nest Protect will say: “This is only a test.
The alarm will sound.”
3. Ensure that the alarm sounds and the light
illuminates on each Nest Protect.
4. Once the Nest Protect has made sure it’s
working, it’ll tell you everything’s okay. If you
have interconnected Nest Protects, all of
them should speak.
Loading ...
Loading ...
Loading ...