Loading ...
Loading ...
Loading ...
NOT IN
THIS AREA
ANYWHERE IN
THIS AREA
NOT IN
THIS AREA
ANYWHERE IN
THIS AREA
NEST LOGO
IS UPRIGHT
4
in
(10cm)
4
in
(10cm)
3
ft
(0.9 m)
3
ft
(0.9 m)
3
ft
(0.9 m)
Figure 2
Figure 3
Figure 4
12 in
(30.5 cm)
Maximum
BEST
HERE
4 in
(10 cm)
Minimum
4 in
(10 cm)
Minimum
NOT IN
THIS AREA
CEILING
SIDE
WALL
OKAY
HERE
NEST LOGO
IS UPRIGHT
Figure 1
1
1
2
2
1110
Placement on the ceiling or wall
Installing on the ceiling is recommended.
Mark where the screws will go using the
base as a guide. Make sure it’s at least
4 inches (10 cm) away from the wall.
Placement on a sloped ceiling
If you have a sloped, peaked or cathedral
ceiling, Nest Protect should be 4 inches to
3 feet (10 cm – 1 m) from the highest point.
7. Install your Nest Protect
Line up the three tabs on the back of your
Nest Protect with the notches on the backplate.
Hold Nest Protect against the backplate and
turn it clockwise. Continue turning until it’s
square with the wall or ceiling. Install the rest
of your Nest Protects if you have more.
Tip: If you ever need to remove your Nest Protect
(for cleaning or battery replacement), turn it
counterclockwise until it disconnects from
the backplate.
8. Press to test
Press the Nest button on one Nest Protect.
It will tell you what to do next. Every
Nest Protect in the house should speak
up, confirming that they’re connected to
each other.
Loading ...
Loading ...
Loading ...