Loading ...
Loading ...
Loading ...
professional.
. If you are experiencing symptoms that are inconsistent with your
blood glucose test, and you have followed all of the instructions
provided in this Owner's Manual, contact your healthcare
professional immediately.
. Use only fresh whole blood samples to test your blood glucose.
. Do not use test strips that are expired or appear to be damaged
as they may return inaccurate results.
. The lancing device is for self-use only. Do not share or re-use
lancets. Please refer to the La ncing Device Manual for the detailed
procedure.
For more detailed information, please refer to the resources
identied below:
"FDA Public Health Notication: Use of Fingerstick Devices on
More than One Person Poses Risk for Transmitting Bloodborne
Pathogens: Initial Communication" (2010)
http ://www.fda.gov/MedicaIDevices/Safety/
AlertsandNotices/ucm224025.htm
"CDC Clinical Reminder: Use of Fingerstick Devices on More than
One Person Poses Risk for Transmitting Bloodborne
Pathogens"(2010)
http://www.cdc.gov/injectionsafety/Fingerstick-DevicesBGM.html
FIRST TIME SETUP INSTRUCTIONS
. Download the companion app
Prior to rst use, download and install the free iHealth
Gluco-Smart App from the Apple App Store or Google Play Store.
Follow the on-screen instructions to create your iHealth account.
. Access iHealth Cloud
You can use your iHealth ID to gain access to free and secure
Cloud Services. Go to www.ihealthlabs.com and click on "Sign In".
. Charge the battery
Out of the box
Your meter is powered by a built-in, rechargeable battery. Plug
one end of the charging cable into the side of the meter and the
other end into an USB charger port. Charge it for two to four hours
before rst use. A fully charged battery can typically last up to 200
tests depending on your daily usage.
Low battery message
After you have used your meter for some time, appears for
three seconds when the battery in your meter is low on power.
You must recharge the battery before using it again. After three
seconds, the meter shuts o automatically. The meter does not
take any measurement when the battery is low.
Important: If battery is completely drained, fully charge the
battery and launch the app to sync the meter before using it
again.
. Sync the meter
Prior to rst use, follow the steps below to connect the meter to
the app on your smart device to set your meter's time and date. By
connecting the two, the date and time of the meter will be synced
with your smart device.
1. Enable Bluetooth on your iOS or Android device.
2. Press and hold the "Memory" button for three seconds to turn
the meter on.
Mobile Device Compatibility
Works with the following devices:
iPhone 4+
iPad 2+
iPad Mini+
iPad Air+
iPod Touch (5th generation)
Select Android devices
Requires iOS version 7.0+ or Android version 4.0+
TEST PRINCIPLE
Testing with the iHealth system is based on the measurement of
electrical currents generated by the reaction of glucose with the
reagent of the test strip. The iHealth system measures the current
and converts it to the corresponding blood glucose level. The
strength of the current produced by the reaction depends on the
amount of glucose in the blood sample.
IMPORTANT TEST INFORMATION
Please read the following:
. Severe dehydration and excessive water loss may cause
inaccurate results. If you believe you are suering from severe
dehydration, consult your healthcare professional immediately.
. Inaccurate results may occur in severely hypotensive individuals
or patients who are in shock. Test results that are lower than actual
values may occur in individuals who are in a hyperglycemic-hyper-
osmolar state, with or without ketosis. Critically ill patients should
not be tested with blood glucose meters.
. If your blood glucose results are lower or higher than usual, and
you do not have symptoms of illness, rst repeat the test. If you
have symptoms or continue to get results that are higher or lower
than usual, follow the treatment advice of your healthcare
8
Loading ...
Loading ...
Loading ...