08/54126/0 Issue 1
OCN
Cassia Noir
The product complies with the European Safety Standards and the European Standard Electromagnetic Compatibility (EMC).
These cover the essential requirements of EEC Directives.
UK
EN : This product is only suitable for well insulated rooms or occasional use. DE : Dieses Produkt ist nur für gut isolierte Bereiche oder gele-
gentliche Verwendung geeignet. FR : Ce produit convient uniquement à des endroits bien isolés ou pour un usage occasionnel. IT : Questo
prodotto è adatto solo per spazi ben isolati o per uso occasionale. ES : Este producto sólo es adecuado para espacios bien aislados o un
uso ocasional. NL : Dit product is uitsluitend geschikt voor goed geïsoleerde ruimten of voor sporadisch gebruik. PL : Produkt ten jest odpow-
iedni wyłącznie do dobrze odizolowanych miejsc lub do okazjonalnego użytku. NO : Dette produktet egner seg kun for godt isolerte rom eller
sporadisk bruk. RO : Acest produs este adecvat exclusiv spaţiilor bine ventilate sau utilizării ocazionale. CZ : Tento výrobek je vhodný pouze
do dobře izolovaných prostor nebo k příležitostnému použití. DK : Dette produkt er kun egnet til velisolerede rum eller lejlighedsvis brug. PT :
Este produto somente é adequado para espaços bem isolados ou uso ocasional. SE : Denna produkt är endast avsedd för välisolerade utrym-
men eller tillfällig användning. FI : Tämä tuote soveltuu ainoastaan hyvin eristettyihin tiloihin tai satunnaiseen käyttöön. SK : Tento výrobok je
vhodný len pre dobre izolované priestory alebo na občasné použitie. SI : Ta izdelek je primeren le za dobro izolirane prostore ali za občasno
uporabo. HR : Ovaj proizvod je pogodan samo za dobro izolirane prostore ili povremenu upotrebu. HU : Ez a termék csak jól szigetelt terekhez
vagy eseti használatra alkalmas.
2
3
4
1
5
1
2
3
5
4
1
2
3
I
I
I
min max
OFF
ON
T
econ
LED
Indicators
IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE
Technical Information :
with mechanic thermostat room temperature control.
General
Unpack the heater carefully and retain the packaging for possible
future use, in the event of moving or returning the re to your supplier.
These models are designed to be free standing and are normally
positioned against a wall.
The re incorporates a ame effect, which can be used with or without
heating, so that the comforting effect may be enjoyed at any time of
the year. Using the ame effect on its own only requires little electricity.
A choice of 1kW or 2kW heat output is provided by the fan heater,
which is located at the bottom of the unit.
Before connecting the heater check that the supply voltage is the same
as that stated on the heater.
Please note: Used in an environment where background noise is
very low, it may be possible to hear a sound which is related to
the operation of the ame effect. This is normal and should not
be a cause for concern.
Electrical connection
WARNING – THIS APPLIANCE MUST BE EARTHED.
This heater must be used on an AC ~ supply only and the voltage
marked on the heater must correspond to the supply voltage.
Before switching on, please read the safety warnings and operating
instructions.
Controls - see Fig. 2
These main ON/OFF switch must rst be turned ON to operate any
of the other controls.
Setting Operation Indication
Flame Effect Press the ‘I’ button once Bottom Neon
Flame Effect & 1kW heat Press the ‘I’ button again Bottom & middle neon
Flame Effect & 2kW heat Press the ‘I’ button again All 3 neons
To turn off any of the Press the’O’button once.
settings
Cassia Petro
UK
Important Safety Advice
When using electrical appliances, basic
precautions should be followed to reduce
the risk of re, electric shock, and injury to
persons, including the following:
If the appliance is damaged, check immedi-
ately with the supplier before installation and
operation.
Do not use this appliance in the immediate
surroundings of a bath, shower or swimming
pool.
Do not use outdoors.
This appliance must not be located immedi-
ately above or below a xed socket outlet or
connection box.
WARNING : The appliance carries
the Warning Symbol indicating that it
must not be covered or has a Do not
cover label. Do not cover or obstruct
in any way the heat outlet grille located
underneath the appliance Overheating will
result if the appliance is accidentally cov-
ered. Do not place material or garments on
the appliance, or obstruct the air circulation
around the appliance, for instance by cur-
tains or furniturne, as this could cause over-
heating and a re risk.
In the event of a fault unplug the heater.
Unplug the appliance when not required
for long periods.The supply cord must be
placed on the right hand side of the heater
away from the heat outlet underneath the
appliance.
Although this appliance complies with safety
standards, we do not recommend its use
on deep pile carpets or on long hair type of
rugs.
This appliance can be used by children
aged form 8 years and above and persons
with reduced physical, sensory or mental ca-
pabilities or lack of experinence and knowl-
edge if they have been given supervision or
instruction concerning use of the appliance
in a safe way and understand the hazards
involved. Children shall not play with the
appliance. Cleaning and user maintaince
shall not be made by Children without su-
pervision.
Children of less than 3 years should be
kept away unless continuously supervised.
Children aged from 3 years and less than 8
years shall only switch on/off the appliance
provided that it has been placed or installed
in its intended normal operating position and
they have been given supervision or instruc-
tion concerning use of the appliance in a
safe way and understanding the hazards
involved. Children aged from 3 years and
less than 8 years shall not plug in, regulate
and clean the appliance or perform user
maintaince.
The appliance must be positioned so that
the plug is accessible.
If the supply cord is damaged it must be re-
placed by the manufacturer or service agent
or similarly qualied person in order to avoid
a hazard.
CAUTION: In order to avoid a hazard due
to inadvertent resetting of the thermal cut-
out, this appliance must not be supplied
through an external switching device, such
as a timer, or connected to a circuit that is
regularly switched on and off by the utility.
This appliance is not equipped with a
device to control the room. Do not use
this heater in small rooms when they
are occupied by persons not capable of
leaving the room on their own, unless
constant supervision is provided.
CAUTION - Some parts of this product
can become very hot and cause burns.
Particular attention has to be given
where children and vulnerable people are
present.
This instruction can be found at
www.dimplex.co.uk
Model No: RTOFSTV20
Heat Output 230V 240V
Nominal Heat Output P
Nom
1.7 - 1.9 kW
Minimum Heat Output P
min
0.9 - 0.9 kW
Maximum Continous Heat Output P
max,c
1.7 - 1.9 kW
Auxiliary Electricity Consumption 0 0 kW
In Standby mode el
SB
0.38 - 0.41 W
Cassia Petro
IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE
Dimplex
Millbrook House
GrangeDrive
HedgeEnd
Southampton
Hampshire.SO30 2DF
TEL: 0844 879 3588
FAX: 0844 879 3583
WEBSITE: www.dimplex.co.uk
Republic of Ireland Tel. 01 8424833
[c] GDC Group Ltd,
All rights reserved. Material contained in this publication may not be reproduced in whole or in part, without prior permission in writing of Dimplex, a division of
GDC Group Ltd.
UK
LED indicators - see Fig. 3
Three LED’s as shown in Fig. 3 indicate the setting for a couple of
seconds every time you change the setting.
One LED means ON (ame effect only, no heat), two LED’s means 1kW
heat and all three LED’s are on to indicate full 2kW heat setting.
Remote control - see Fig. 4
The maximum range of use is ~ 15metres.
The buttons on the remote control have the same function as the swiches
on the heater.
For details on the function please refer to the ‘Controls’ section above.
Warning: It takes time for the receiver to respond to the transmitter.
Do not press the buttons more than once within two seconds for correct
operation.
Battery information - see Fig. 4
1. To activate the remote control remove the battery isolation
strip, which is used to ensure your remote control reaches
you fully charged.
2. To replace the remote control battery, turn over the remote
control, and follow the diagram embossed on the remote control
3. Only use CR2025 or CR2032 size of batteries
Discard leaking batteries
Dispose of batteries in the proper manner according to provincial and
local regulations.
Any battery may leak electrolyte if mixed with a different battery type, if
inserted incorrectly; if all the batteries are not replaced at the same time;
if disposed of in a re, or if an attempt is made to charge a battery not
intended to be recharged.
Light Emitting Diode
This re is tted with LED (Light Emitting Diode) lamps. These LED
lamps are maintenance-free and should not require replacing during
the life of the product.
Thermostat (T) - see Fig. 2
In order to maintain a certain room temperature, set the controller to
‘max.’. Operate the appliance at full power until the required room
temperature is reached. Set back the thermostatic controller until the
appliance switches off with an audible “click”. This temperature will be
kept almost constant by the thermostatic control switching on and off
automatically.Please note that the appliance can only be switched on
when the thermostat setting is higher then the room temperature.
Thermal Safety Cut-out
The built-in overheat cut-out switches off the appliance automatically in
the event of a fault. If this occurs switch off the appliance or disconnect
the mains plug from the socket. Remove any obstructions which may
have caused the overheating. After a short cooling down phase, the
appliance is ready for use again. If the fault should occur again, unplug
the appliance and contact your local dealer.
grille of the fan heater.
Instructions for tting Coal Option - see Fig. 5
Introduction
Your re is provided with a coal effect option. Simply follow the instruc-
tions given below.
Removal of Log Effect
Remove the screws securing the log effect assembly and slide out
(see Fig. 5).
Fitting Coal Effect
Fit the coal effect in position and secure with the screws
(see Fig. 5).
Place the coal lumps on the fuel bed. A plastic glove is provided for
handling the coal.
Note: The log effect should be stored away for possible future use.
Maintenance
WARNING: ALWAYS DISCONNECT FROM THE POWER SUPPLY
BEFORE ATTEMPTING ANY MAINTENANCE.
Cleaning
WARNING – ALWAYS DISCONNECT FROM THE POWER SUPPLY
BEFORE CLEANING THE HEATER.
For general cleaning use a soft clean duster – never use abrasive
cleaners. The glass viewing screen should be cleaned carefully with a
soft cloth. DO NOT use proprietary glass cleaners.
To remove any accumulation of dust or uff the soft brush attachment
of a vacuum cleaner should occasionally be used to clean the outlet
grille of the fan heater.
Recycling
For electrical products sold within the European Community.
At the end of the electrical products useful life it should not be disposed
of with household waste. Please recycle where facilities exist. Check
with your Local Authority or retailer for recycling advice in your country.
After Sales Service
Your product is guaranteed for one year from the date of purchase.
Within this period, we undertake to repair or exchange this product free
of charge (excluding lamps & subject to availability) provided it has
been installed and operated in accordance with these
instructions.
Your rights under this guarantee are additional to your
statutory rights, which in turn are not affected by this
guarantee.
Should you require after sales information or assistance
with this product please go to www.dimplex.co.uk where
you will nd our self help guide by clicking on “After Sales”
or ring our helpdesk on 0844 879 3588 (UK) or 01 842 4833 (R.O.I.) .
Spare parts are also available on the website: www.dimplex.co.uk
Please retain your receipt as proof of purchase.
