Loading ...
Loading ...
Loading ...
nuwavenow.com
13
nuwavenow.com
13
ENGLISH
Vacuum Lid Assembly
1. Underneath Vacuum Lid, make sure the Vacuum Plug is in
place and screw Vacuum Cap up into Vacuum Lid clockwise
until tight.
2. Line up red dot (located on top of Lid) with the handle.
3. Push down on the Lid until it sits firmly in place.
• Make sure to turn the Release Valve to the Lock position
before using vacuum function.
• Vacuum Lid will NOT open when in Lock position.
Use Vacuum Lid when vacuum-blending only.
Vacuum Arm
Switch
Jar Assembly with the Vacuum Lid
1. Lift the Vacuum Arm up.
2. Place the Jar on Base by aligning it on top of the 4
Rubber Columns.
• The Vacuum Cap needs to be screwed tightly into place prior
to use.
3. Push the Vacuum Arm down and press on Lid until a connection is
made and a click is heard.
4. Make sure the Release Valve is in Lock position before vacuuming.
• Before removing Vacuum Lid, turn the Release Valve to
open position.
Lock
Close
Open
Close
Open
4 Rubber Columns
CAUTION
Make sure all parts are securely attached.
Loading ...
Loading ...
Loading ...