User Manual - Page 248

For TRX500FE2 E 2019.

Loading ...
Loading ...
Loading ...
Taking Care of the Unexpected
238
If the Battery Is Low (or Dead)
The electric shift system will operate even if the battery is low (or
dead), as long as the engine is running. If the engine is not running,
it may be started using the recoil starter.
1.
Turn the ignition switch to the ON (q) position.
2.
Check if the transmission is in neutral by moving the vehicle back
and forth.
3.
If the transmission is in neutral, the vehicle will move easily. Go to
step 6. If the transmission is not in neutral, the vehicle will not
move.
4.
Remove the gear change tool from under of the rear fender cover
(page 129).
5.
Use the gear change tool to shift to neutral so you will be able to
start the engine. Refer to How to Shift Gears Manually:
(page 225).
6.
Apply the parking brake.
7.
Turn the ignition switch to the OFF (w) position, then turn it back
to the ON (q) position.
8.
Use the recoil starter (page 90) to start the engine.
Jump starting is not recommended, especially if you use an
automobile battery. The greater amperage of an automobile battery
when the car engine is running can damage your ATV’s electrical
system.
Bump starting is also not recommended.
If you can’t charge the battery or it appears unable to hold a charge,
contact your dealer.
19 TRX500FE2 (ED)-32HR48500.book 238 ペー 2018年4月24日 火曜日 午前1151
Loading ...
Loading ...
Loading ...