Loading ...
Loading ...
Loading ...
Servicing Your Honda
200
Battery
7.
Charge the battery (see following section).
8.
Store your battery in an easy-to-reach location off the floor, in an
area protected from freezing temperature and direct sunlight.
9.
Clean the compartment after removing the battery for storage.
Dry the compartment.
10.
Slow charge the battery (see following section) once every 30
days.
Installation
1.
Check that the battery rubber (6) for damage. If necessary,
replace the battery rubber.
2.
Make sure the battery rubber is properly installed.
3.
Reinstall the battery in the reverse order of removal.
Be sure to connect the positive (+) terminal first, then the
negative (–) terminal.
4.
Make sure all bolts and other fasteners are secure.
5.
Install the removed parts in reverse order of removal.
Make sure the clock is set to the proper time (page 30) after the
battery is reconnected.
(6)
(6) battery rubber
19 TRX500FE2 (ED)-32HR48500.book 200 ページ ２０１８年４月２４日 火曜日 午前１１時５１分
Loading ...
Loading ...
Loading ...