Loading ...
Loading ...
Loading ...
Taking Care of the Unexpected
228
If You Have a Flat Tyre
Installation
1.
Position the wheel.
2.
Position each wheel nut so that the tapered side faces the wheel
rim (2).
3.
Hand-tighten the wheel nuts on the wheel, then lower the ATV
to the ground before tightening the nuts in a crisscross (rather
than circular) pattern to the specified torque:
64 N·m (6.5 kgf·m, 47 lbf·ft)
If a torque wrench was not used for installation, see your dealer as
soon as possible to verify proper assembly. Improper assembly may
lead to loss of braking capability.
19 TRX500FE2 (ED)-32HR48500.book 228 ページ ２０１８年４月２４日 火曜日 午前１１時５１分
Loading ...
Loading ...
Loading ...