Loading ...
Loading ...
Loading ...
Version 3/15 - Page 14
INSTALLING IBDD600 IN FRONT OF THE HOOD,
WHEN VENTING TO THE BACK
PRODUCT INSTALLATION
FIGURE 16
- When venting to the rear with the IBDD600
blower mounted on the front of the unit, some
modication to the blower box is required
(FIGURE 16)
- Loosen the two screws holding the blower in
the box. Take the blower out of the box
FIGURE 17
- Remove the small cover on the back of the
hood (FIGURE 17)
- Mount the blower on the front of the hood using
two screws while positioning the vent collar in
the opening of the cover (FIGURE 18)
FIGURE 18
- Disconnect the cable from inside the hood. Plug
in that same cable from the hood into the motor
kit. (FIGURE 19)
- Remove the vent collar from the blower box and
close the opening in the blower with the cover
removed from the back of the hood housing
removed from FIGURE 17. Attach it with 4
screws. (FIGURE 20).
- Mount the vent collar on the back of the hood
(FIGURE 21)
- Mount the blower box to the housing with 4
screws (FIGURE 22)
Continue to Page 14 for Electrical
Connections
FIGURE 19
FIGURE 20
FIGURE 21
FIGURE 22
Loading ...
Loading ...
Loading ...