Loading ...
Loading ...
Loading ...
Using Keep Warm function for more than 12hours may cause discoloration or an objectionable odor in the rice.
During keep warm and reheat mode, set the lid handle at “Lock”
(Or, it could impact a keep warm function or a breakdown of the clamp knob)
How to keep warm
1
After the cooking process is finished it is automatically switched to warming function. Make sure to stir the
cooked rice well as soon as the cooking process is completed with the rice scoop (within 5 minutes)
3
The mixed and brown rice cannot be in such good condition as white rice while in warm function due to their
characteristics. Therefore do not keep mixed and brown rice in function for a long period of time.
2
Do not keep the scoop inside the pot while warming the rice.
When using a wooden scoop it can cause serious bacteria and odors.
4
If the amount of rice inside the pot isn't that much, keep it at the center of the pot.
5
Do not warm the cold rice or do not mix the cold rice with the warm.
7
Because there will always be alien substances on the lid inside(heating part), always remember to clean the
lid before and after using.
8
During warm mode, the rice can turn white and rise. In this case, stir the rice.
6
Always keep the power connected while warming the rice.
If you turn the lock/unlock handle to “Unlock”, the “Unlock” will be displayed. But the rice is still in warming
function. The warming efficiency is better when the handle is kept at “Lock”.
Even though you clean and disinfect with boiling water, if the rice still turns yellow and the rice smells bad or the
rice gets cold, it usually means the warming temperature isn t proper. You have to adjust the warming
temperature.
When you want to control the warming temperature during warm mode, Press the “My mode” button longer than
2 second .
1. When the color of the rice hasn t changed but the rice smells bad, or when the rice feels cold. (the warming temperature is lower than
normal so raise the warming temperature about 1~2 c)
2. When the color of the rice turns yellowish and the rice smells bad. (the warming temperature is higher than normal so reduce the warming
temperature about 1~2 c)
-2 Press “Min/Heat” button to change
the display as
Press the “My Mode” button more
than 2 seconds during warming or
reheating. The display of mark will be
changed with buzzer.
-1 Press “Hr/SOAK” button to change
the display as
Set up the desired temperature. Press
“My Mode” button and set-up time will be
entered with a buzzer sound.
(If you do not press a button within 7
seconds, the function will automatically
go back to normal.)
Adjusting warming temperature
The preset temperature from
maunfacturing can be
different from an operating
manual.
Loading ...
Loading ...
Loading ...