Loading ...
Loading ...
Loading ...
Introduction
English 5Installation Guide - ShowMatch
TM
DeltaQ
TM
Array Rigging Frames
pro.Bose.com
Product Applications
BoseĀ® ShowMatch
TM
array frames and rigging accessories are designed for use with ShowMatch DeltaQ
TM
Array loudspeakers (SM5, SM10, and SM20) and ShowMatch DeltaQ Array subwoofers (SMS118).
Not for use with non-ShowMatch loudspeakers.
Array Frame
Use the ShowMatch Array Frame (SMAF) to create overhead
suspended arrays that contain subwoofer modules, or to create
ground stack arrays that use any combination of subwoofer modules,
mid/high modules, or both.
T-Bar Array Frame
Use the ShowMatch T-Bar Array Frame (SMAFT) to create overhead
suspended arrays that contain mid/high modules only.
Do not use the T-bar Array Frame with arrays that contain subwoofer
modules or to create ground stack arrays.
Array Pullback Bracket
Connect the ShowMatch Array Pullback Bracket (SMPULL) to the
bottom full-range array module to provide third-point suspension to
building structure. This allows more extreme downward angle of arrays
than possible from 2-point, gravity-hang suspension.
Additional Product Information
For more information and complete installation instructions for ShowMatch DeltaQ loudspeaker modules and
compatible accessories, refer to the installation guide available at pro.Bose.com. To request a printed copy,
use the phone numbers provided in the Contact Information section of this guide.
Manufacturer Declaration
We hereby declare that the ShowMatch DeltaQ Array loudspeakers and accessories have been designed and
built in compliance with BGV C1 standards and technical speciļ¬cations. This declaration shall cease to be valid
if alterations are made to the equipment without our prior agreement.
Loading ...
Loading ...
Loading ...