User Manual Fisher & Paykel WH1060P3 Front Loader Washing Machine

Too much water for the load:
Ensure an appropriate water level is selected for the load size (or select 'Auto' water level). Selecting a water level that is too high can cause out of balance loads, tangling or splash-over. Try selecting a water level suitable for the load size

Turn the dial to select 'Spin'. Touch and hold the 'Delay Start' 'More' , the 'Delay Start' 'Less' and 'Options' buttons together for 3 seconds will appear on the screen and the machine will beep. Your washer will now be reset to the default settings

Your machine is checking that the water has drained before spinning. Your washer will beep if you have used 'No Spin' and at the end of the cycle. If your machine is beeping continuously or giving a musical series of beeps, refer to the 'Before you call for service' section.

Take out the two oval plugs on each side of the tub and the screws. Lift the agitator out. Unclip the tub ring clips that go around the tub. Lift the tub out carefully.